I converted Sealy Dan into a bike/car stem valve cover. 

Scale to 96% for a nice tight fit!

Post yo photos

Sealy Valve (bike stem cap)

I converted Sealy Dan into a bike/car stem valve cover. 

Post yo photos

Ariel Rider Logo I modeled in Fusion360. Just bought my ebike from them here:

https://arielrider.com/

ArielRiderLogo.stl

The Arctic ringed Sealy Dan (Sealius Danadus) is a subspecies of ringed seals (Pusa hispida). Arctic ringed Sealy Dan's inhabit the Arctic Ocean, and are the most abundant and wide-ranging seal in the Northern Hemisphere. The ringed Sealy Dan species is the smallest true seal, and gets its name from a distinctive patterning of light spots on dark grey colored fur. The ringed Sealy Dan is commonly preyed upon by Polar Bear, Arctic Monkeys, and The Killers whales. Population estimates and survival rates are unknown, but average life expectancy is 15-28 years.  Ringed Sealy Dans have long been a component of the diet of indigenous people of the Arctic. Arctic ringed Sealy Dans have been listed as threatened on the Endangered Species Act since 2012, and increasingly face loss of their habitat due to shrinking ice and snow cover. 

No Supports Needed

Sealy Dan

The Arctic ringed Sealy Dan (Sealius Danadus) is a subspecies of ringed seals (Pusa hispida). Arctic ringed Sealy Dan's inhabit the Arctic Ocean, and are the most abundant and wide-ranging seal in the Northern Hemisphere. The ringed Sealy Dan species is the smallest true seal, and gets its name from a distinctive patterning of light spots on dark grey colored fur. The ringed Sealy Dan is commonly preyed upon by Polar Bear, Arctic Monkeys, and The Killers whales. Population estimates and survival rates are unknown, but average life expectancy is 15-28 years.  Ringed Sealy Dans have long been a component of the diet of indigenous people of the Arctic. Arctic ringed Seal Dans have been listed as threatened on the Endangered Species Act since 2012, and increasingly face loss of their habitat due to shrinking ice and snow cover. 

No Supports Needed

#CCTMothersDayRemix 

Happy Day to my favorite mother, other than my actual mother of course! 

Happy Mother of Dragons Day.stl

This might be more of a father's day themed remix, but I thought it was funny. Happy Mother Bigbird Day!

#CCTMothersDayRemix Mother Bigbird will provide

Designed this to be printed in multiple parts for multiple colors to be used.


Decided to make this display box after my design placed second in the #3DPNSpeakerCover competition. Not everyone needs a speaker cover, but everyone could use a container of some kind.


I broke up the files to make printing more accessible and to make it easier to print. All of the suction cups and tentacles are now included in single stl files for easy all-at-once printing! 


Please post pictures of your print on this page if you do decide to print it! 


Thank you Thangs and 3D Printing Nerd for making this competition a possibility! I'm looking forward to your future collaborations!


Check out the amazing 1st place winning design (by AtelDsign) of the competition here:

https://thangs.com/atelDsign/3DPNSpeakerCover_printOnFabric_FoldInPlacestl-14347


Check out the announcement video by 3DPrintingNerd here:

https://www.youtube.com/watch?v=Qcm-6OVjkto&t=1s


UncleJessy's print of my design: 

https://www.youtube.com/watch?v=xDFhycnPJVk

NOTE: Please scale the eye-ball file down to 80%. I forgot to scale it properly and Thangs doesn't let you edit files yet.


Octopus Splash Rock Box

OctopusSplashBox.stl

Oak's Laboratory model based off of Pokemon Fire Red and Leaf Green

Modeled in Fusion360!

Please post photos of your prints using Thangs new photo feature on the right hand side of the page --->

Oak's Laboratory Pokemon Fire Red and Leaf Green

Created this model based off of my internet alias "DanishFish"

I am very proud of my Danish heritage on my Dad's side and thus the name originates from the combination of this along with the name of my favorite candy, Swedish Fish.

I printed the model myself on my Prusa Mini at 50% by splitting the model in half in Prusaslicer and painting on support enforcers to the axe and hook on the model.

I hope you enjoy this goofy model based on my goofy internet name.

Viking Fish with Splash Stand

DanishFish_w-splash-stand_whole.stl

#3DPNSpeakerCover

Swappable, poppable, can't be topped-able. 

Do you ever find yourself staring at your 3D printed speakers and think to yourself "man, I wish there was an easier way to change those covers"? Well now there is!

With Swappable Grills (tm - not actually) you can easily swap out between different styled speaker covers. Simply remove the three threaded caps, and replace the current cover with one of your choosing. Design your own with the attached template or choose from the three plates included with this bundle. Base plate and caps should be printed at the best resolution you can muster since they include the threaded rods. Print one of each part and print three of the caps and any extras if you are prone to losing small parts to your cats/vacuum cleaner.

You can easily stretch fit audio friendly meshed fabric over the back of each plate using an appropriate strength adhesive.

Renders of swappable grills can be found here: https://imgur.com/gallery/sJjfBhs

Link to Swappable Grills blank template:https://thangs.com/DanishFish/3DPNSpeakerCover-Swappable-Grills-Blank-Template-14277

Link to competition video: https://youtu.be/qAYv9M7_4WM

Link to my 1st submission: https://thangs.com/lancehegner/3DPNSpeakerCover-Octopus-Splash-Cover-13504

Link to my 2nd submission: https://thangs.com/LancePants/3DPNSpeakerCover-Blasting-Off-Again-13680

Link to my 3rd submission: https://thangs.com/LancePants/3DPNSpeakerCover--Queen-Bee-Sharp-13964

#3DPNSpeakerCover | Swappable Grills

Swappable Grills.stl

Use this blank template to create your own easily Swappable Grill for your speakers.

#3DPNSpeakerCover Swappable Grills: Blank Template

Blank Template

My 3rd submission for 3D Printing Nerd's Speaker Cover Contest. For this one I really wanted to push the limits of Joel's resin printers.

I created a honeycomb mesh in Fusion360 and thought it would be a fun concept to play  around with and build upon. I modeled everything from scratch and did the honey dripping by running fluid simulations in blender and exporting the generated mesh. 

I found this model very difficult to create with all the moving pieces, it became easy to get lost in the semantics of the model.

I hope everyone enjoys the model, as I poured my heart into this one. If you have constructive criticism I am more than open to it.

Print x1 of each piece (24 total) and reference the QueenBeeSharp_complete model/renders for reference to assemble the final print.

Link to renders of model: https://imgur.com/gallery/MLaRqwJ

Link to 1st submission: https://thangs.com/LancePants/3DPNSpeakerCover-Octopus-Splash-Cover-13504

Link to 2nd submission: https://thangs.com/LancePants/3DPNSpeakerCover-Blasting-Off-Again-13680

Link to competition: https://youtu.be/qAYv9M7_4WM

#3DPNSpeakerCover


#3DPNSpeakerCover | Queen Bee Sharp

QueenBeeSharp_complete.stl

#3DPNSpeakerCover

Here is my second submission for 3D Printing Nerd's speaker cover contest . I've never messed with voronoi patterns and thought it would be awesome as rocket smoke.

The voronoi design for the smoke is a fine example of what 3D printers are capable of, although it is a quite challenging print. When I was designing this I was picturing it being printed on a resin printer rather than FDM.

The model is 4 parts unless you want to print the ship in different colors of which I have a parts list for:

x1 RocketBody
x1 RocketEngine
x1 Window
x1 NoseTip
x3 LandingLeg
x3 LandingStrut

The rest of the parts are:

x1 RimFrame
x1 VoronoiCloudMesh
x1 FireStream
x1 ShipOnePiece (if you just want the ship as one part)

Link to model renders: https://imgur.com/gallery/Id1YMQC

Link to competition: https://youtu.be/qAYv9M7_4WM

Link to my first submission: https://thangs.com/lancehegner/3DPNSpeakerCover-Octopus-Splash-Cover-13504

Link to my third submission: https://thangs.com/LancePants/3DPNSpeakerCover--Queen-Bee-Sharp-13964


#3DPNSpeakerCover Blasting Off Again

3DPNSpeakerCover_spaceship_full-model.stl

#3DPNSpeakerCover

Designed this to be printed in multiple parts for multiple colors to be used.

The parts list is as follows:

x1 Eyeball
x1 EyeSocket
x1 Pupil
x1 RimBtm
x1 RimTop
x1 SplashWaterMesh
x2 Tentacle
x4 Suction-s1
x4 Suction-s2
x4 Suction-s3
x4 Suction-s4
x4 Suction-s5

This is for the 3D Printing Nerd's Competition, of whom I've been a fan for a long time. Please let me know if you have any questions!

Link to model renders: https://imgur.com/gallery/nbSi2zY

Link to my 2nd submission: https://thangs.com/LancePants/3DPNSpeakerCover-Blasting-Off-Again-13680

Link to my 3rd submission: https://thangs.com/LancePants/3DPNSpeakerCover--Queen-Bee-Sharp-13964

#3DPNSpeakerCover Octopus Splash Cover

This model depicts the model as a whole an was not intended to be printed this way, but rather assembled with the included parts.

#3DPNSpeakerCover

WholeOctopusSpeaker_for-preview.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow