If your mesh door keeps falling out of the track it may because your door did not come with a top track such as mine did. This print will fix that.

Print up to as many as you need then put glue on the back and slide them into the top track slot.

Each individual piece is 200mm in length. if you want a shorter one then you can use a plane cut.

DO NOT SCALE THIS MODEL!!
Print Settings

Printer brand:

Prusa

Printer:

I3 MK3S

Rafts:
No

Supports:
No

Resolution:
.2 or less

Infill:
10-15%

Filament brand:

ANY

Filament color:

ANY

Filament material:

PLA, PETG, ABS

Notes:

Print with 3 or four Perimeters/Shells
Print with the T upside-down, so that bed adhesion and no supports.

PROTECTED UNDER: 
Sliding Mesh Door FIX byConn22_43is licensed under theCreative Commons - Attribution - Share Alikelicense.


Mesh Door FIX

If your mesh door keeps falling out of the track it may because your door did not come with a top track such as mine did. This print will fix that.

Print up to as many as you need then put glue on the back and slide them into the top track slot.

Each individual piece is 200mm in length. if you want a shorter one then you can use a plane cut.

DO NOT SCALE THIS MODEL!!
Print Settings

Printer brand:

Prusa

Printer:

I3 MK3S

Rafts:
No

Supports:
No

Resolution:
.2 or less

Infill:
10-15%

Filament brand:

ANY

Filament color:

ANY

Filament material:

PLA, PETG, ABS

Notes:

Print with 3 or four Perimeters/Shells
Print with the T upside-down, so that bed adhesion and no supports.


If your mesh door keeps falling out of the track it may because your door did not come with a top track such as mine did. This print will fix that.

Print up to as many as you need then put glue on the back and slide them into the top track slot.

Each individual piece is 200mm in length. if you want a shorter one then you can use a plane cut.

DO NOT SCALE THIS MODEL!!
Print Settings

Printer brand:

Prusa

Printer:

I3 MK3S

Rafts:
No

Supports:
No

Resolution:
.2 or less

Infill:
10-15%

Filament brand:

ANY

Filament color:

ANY

Filament material:

PLA, PETG, ABS

Notes:

Print with 3 or four Perimeters/Shells
Print with the T upside-down, so that bed adhesion and no supports.

PROTECTED UNDER:
Sliding Mesh Door FIX byConn22_43is licensed under theCreative Commons - Attribution - Share Alikelicense.

Rail.stl

https://www.prusaprinters.org/social/62666-conn-prints/prints
https://www.thingiverse.com/conn22_43/designs
I Am A...

Maker

Engineer
3D Design Skill Level

Intermediate
Tools I Use
Printer:Ender 3CR-10Creator Pro
Software:Fusion 360MeshMixerZBrushTinkercad

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like