DigitalDigital Store
Bundle
PrintsPrint Store
My Thangs
Access 15,000+ models$14.99/month
DigitalDigital Store
Bundle
PrintsPrint Store
My Thangs
Access 15,000+ models$14.99/month
Cinderwing3D
Cinderwing3D15K followers
Follow
Cinderwing3D
Cinderwing3D
|
Image 1 of 5
Crystal Dragon 3d model
Cinderwing3D
Cinderwing3D
|
Image 1 of 5
Crystal Dragon 3d model
Crystal Dragon 3d model
Crystal Dragon 3d model
Crystal Dragon 3d model
Crystal Dragon 3d model
Crystal Dragon 3d model

Crystal Dragon

6.1K downloads · 2 years ago · The Original Crystal Dragon! Print in Place with no supports!! Personally designed to be very flexib
Subscribe for access starting at $10 USD
Get access to this model and 454+ more
This model is restricted by licensing terms. 
View license.
DescriptionInstructions

3D PRINTING SETTINGS

FDM Settings
3 walls
10-25% infill
No supports
Try brims if you have adhesion issues.
Models tested between 60-100% generally

Resin Settings
No supports, flat on plate
50 um layer thickness
Light off delay can be helpful to let resin drip from links.

Proper bottom exposure tuning is recommended. Models, particularly in clear resins, can suffer from overexposure and fused links. The Ameralabs Town
testing is highly recommended to tune your settings as to get proper articulated prints! Exposure varies greatly between resins, printers, and environments.

Tags:

Community Makes (17)
Printed with Translucent PLA filament on the X1C
So cute. Polymaker rainbow gradient filament
Printer: Creality K2 Pro (but that wasn't an option in the printer picklist) Scale: 125% Filament Brand: Cookiecad Color: Witches Blue I got a new printer for Christmas; I wanted to see what it was capable of so I decided to scale up this dragon and give her a go! Sliced print time said 13 hrs 25 min but it actually took somewhere closer to 11 hrs with an Ultrafast 125% print speed. She's a long one, approximately 30.5 inches. The table she's on is 31.5 inches long. Fully articulated, no problems at all. And she sounds crystalline when she moves. I freaking love her. Also, this Cookiecad filament, the pictures don't do it justice. The Witches Blue is such a deep purple with blue shift, but the blue is not coming through as well in the pictures.
Make by user
Make by user
I was worried about the hollows and not sure if I should print it or not, so glade I did. Had a couple of mistakes removing the supports and cleaning. other than that print worked flawless. Printed with Saturn 4 Ultra. I did not use the whole plate.
What did I do wrong? There's all this "support" I guess that's stuck between the connecting pieces. It's an absolutely beautiful design but I can't get all this gunk out.
Love this dragon <3
Make by user
Only 12 hours to go!
My make! :)
Make by user
Make by user
Make by user
Make by user
Make by user
Make by user
Printed with Translucent PLA filament on the X1C
So cute. Polymaker rainbow gradient filament
Printer: Creality K2 Pro (but that wasn't an option in the printer picklist) Scale: 125% Filament Brand: Cookiecad Color: Witches Blue I got a new printer for Christmas; I wanted to see what it was capable of so I decided to scale up this dragon and give her a go! Sliced print time said 13 hrs 25 min but it actually took somewhere closer to 11 hrs with an Ultrafast 125% print speed. She's a long one, approximately 30.5 inches. The table she's on is 31.5 inches long. Fully articulated, no problems at all. And she sounds crystalline when she moves. I freaking love her. Also, this Cookiecad filament, the pictures don't do it justice. The Witches Blue is such a deep purple with blue shift, but the blue is not coming through as well in the pictures.
Make by user
Make by user
I was worried about the hollows and not sure if I should print it or not, so glade I did. Had a couple of mistakes removing the supports and cleaning. other than that print worked flawless. Printed with Saturn 4 Ultra. I did not use the whole plate.
What did I do wrong? There's all this "support" I guess that's stuck between the connecting pieces. It's an absolutely beautiful design but I can't get all this gunk out.
Love this dragon <3
Make by user
Only 12 hours to go!
My make! :)
Make by user
Make by user
Make by user
Make by user
Make by user
Make by user
Community Makes (17)
Printed with Translucent PLA filament on the X1C
So cute. Polymaker rainbow gradient filament
Printer: Creality K2 Pro (but that wasn't an option in the printer picklist) Scale: 125% Filament Brand: Cookiecad Color: Witches Blue I got a new printer for Christmas; I wanted to see what it was capable of so I decided to scale up this dragon and give her a go! Sliced print time said 13 hrs 25 min but it actually took somewhere closer to 11 hrs with an Ultrafast 125% print speed. She's a long one, approximately 30.5 inches. The table she's on is 31.5 inches long. Fully articulated, no problems at all. And she sounds crystalline when she moves. I freaking love her. Also, this Cookiecad filament, the pictures don't do it justice. The Witches Blue is such a deep purple with blue shift, but the blue is not coming through as well in the pictures.
Make by user
Make by user
I was worried about the hollows and not sure if I should print it or not, so glade I did. Had a couple of mistakes removing the supports and cleaning. other than that print worked flawless. Printed with Saturn 4 Ultra. I did not use the whole plate.
What did I do wrong? There's all this "support" I guess that's stuck between the connecting pieces. It's an absolutely beautiful design but I can't get all this gunk out.
Love this dragon <3
Make by user
Only 12 hours to go!
My make! :)
Make by user
Make by user
Make by user
Make by user
Make by user
Make by user
Printed with Translucent PLA filament on the X1C
So cute. Polymaker rainbow gradient filament
Printer: Creality K2 Pro (but that wasn't an option in the printer picklist) Scale: 125% Filament Brand: Cookiecad Color: Witches Blue I got a new printer for Christmas; I wanted to see what it was capable of so I decided to scale up this dragon and give her a go! Sliced print time said 13 hrs 25 min but it actually took somewhere closer to 11 hrs with an Ultrafast 125% print speed. She's a long one, approximately 30.5 inches. The table she's on is 31.5 inches long. Fully articulated, no problems at all. And she sounds crystalline when she moves. I freaking love her. Also, this Cookiecad filament, the pictures don't do it justice. The Witches Blue is such a deep purple with blue shift, but the blue is not coming through as well in the pictures.
Make by user
Make by user
I was worried about the hollows and not sure if I should print it or not, so glade I did. Had a couple of mistakes removing the supports and cleaning. other than that print worked flawless. Printed with Saturn 4 Ultra. I did not use the whole plate.
What did I do wrong? There's all this "support" I guess that's stuck between the connecting pieces. It's an absolutely beautiful design but I can't get all this gunk out.
Love this dragon <3
Make by user
Only 12 hours to go!
My make! :)
Make by user
Make by user
Make by user
Make by user
Make by user
Make by user
Discussions
IAMJediSpidey
jedispidey2 years ago
3d model
Trevor3DPrints
Trevor3DPrints2 years ago
3d model
3d model
3d model
3d model
3d model
3d model
3d model
3d model
3d model
3d model
Theresa T
ttaillefer11 months ago

What colour/kind of filament is this? (newbie here)

Carson M
Poly Forge6 months ago

idk but i wish they'd respond

Cinderwing3D
Cinderwing3D6 months ago

These were made in resin.

Filament F
filamentfoundryllc6 months ago

Tracy, are the resin prints articulated as well?

Cinderwing3D
Cinderwing3D6 months ago

They aren't any different from the FDM ones really! Just different layouts

Filament F
filamentfoundryllc6 months ago

F/U question: Are these supposed to be hollowed out or printed in 100% infill when doing so in resin?

Cinderwing3D
Cinderwing3D6 months ago

you do not want them hollow, as you cant clean the insides :) they need to be printed full

Carson M
Poly Forge6 months ago

Thank you 🙏

Trevor3DPrints
Trevor3DPrints3 months ago

Responded. Sorry I didn’t get notified.

Trevor3DPrints
Trevor3DPrints3 months ago

Sorry never saw this until now. They were printed with clear resin

Trevor3DPrints
Trevor3DPrints3 months ago
Printed with Translucent PLA filament on the X1C
Printed with Translucent PLA filament on the X1C 3d model
3d model
3d model
PrinterBambu Lab X1
MaterialPLA
welmby
dqgobo5 months ago
So cute. Polymaker rainbow gradient filament
So cute. Polymaker rainbow gradient filament 3d model
PrinterAnkerMake M5C
MaterialPLA
Kelcy K
Kelcy's Kreatures1 year ago
Love this dragon <3
Love this dragon <3 3d model
PrinterBambu Lab P1P
Print bed sizeX: 256 mm; Y: 256 mm; Z: 256 mm
MaterialPLA
Layer height0.28 mm
Infill density10 %
Linus E
engalunda1 year ago
My make! :)
My make! :) 3d model
3d model
3d model
3d model
PrinterBambu Lab A1
Print bed sizeX: 256 mm; Y: 256 mm; Z: 256 mm
MaterialPLA
Layer height0.2 mm
Infill density15 %
Bonham.moss
Bonham.moss5 months ago

omg what colors are those

Luke S
lsaintignan8 months ago
3d model
3d model
3d model
3d model
3d model
S
shyser182 years ago
3d model
3d model
Elliot P
whirlingpond4042 years ago
3d model
PrinterBambu Lab A1 mini
MaterialPLA+
SupportsNone
Shawn A
shawndonaldabell1 year ago
I was worried about the hollows and not sure if I should print it or not, so glade I did. Had a couple of mistakes removing the supports and cleaning. other than that print worked flawless. Printed with Saturn 4 Ultra. I did not use the whole plate.
I was worried about the hollows and not sure if I should print it or not, so glade I did. Had a couple of mistakes removing the supports and cleaning. other than that print worked flawless. Printed with Saturn 4 Ultra. I did not use the whole plate. 3d model
3d model
3d model
3d model
3d model
PrinterElegoo Saturn
Print bed sizeX: 218 mm; Y: 122 mm; Z: 220 mm
MaterialStandard
Layer height0.05 mm
Infill density100 %
T
TwoClarks9 months ago

how did you get it so long lol

View all 38 discussions

Crystal Dragon

6.1K downloads · 2 years ago in 
Sculptures & Statues
 and 
Action Figures & Collectibles
Cinderwing3D
Cinderwing3D15K followers
Follow
Subscribe for access starting at $10 USD
Get access to this model and 454+ more
This model is restricted by licensing terms. 
View license.

More models

Cinderwing3D
Cinderwing3D
Rabbit - Hatchling 3d model

Rabbit - Hatchling

Cinderwing3D
Cinderwing3D
Guinea Pig - Hatchling 3d model

Guinea Pig - Hatchling

Cinderwing3D
Cinderwing3D
Golden Retriever - Hatchling 3d model

Golden Retriever - Hatchling

Cinderwing3D
Cinderwing3D
Ferret - Hatchling 3d model

Ferret - Hatchling

Cinderwing3D
Cinderwing3D
Betta Fish - Hatchling 3d model

Betta Fish - Hatchling

Cinderwing3D
Cinderwing3D
Cockatiel - Hatchling 3d model

Cockatiel - Hatchling

Cinderwing3D
Cinderwing3D
Monstera Leaf Dragon 3d model

Monstera Leaf Dragon

Cinderwing3D
Cinderwing3D
Baby Monstera Leaf Dragon 3d model

Baby Monstera Leaf Dragon

Cinderwing3D
Cinderwing3D
Tiny Star Cookie Dragon and Wyvern 3d model

Tiny Star Cookie Dragon and Wyvern

Cinderwing3D
Cinderwing3D
Chocolate Strawberry Turtle 3d model

Chocolate Strawberry Turtle

Cinderwing3D
Cinderwing3D
Tortoise - Hatchling 3d model

Tortoise - Hatchling

Cinderwing3D
Cinderwing3D
Axolotl - Hatchling 3d model

Axolotl - Hatchling

Cinderwing3D
Cinderwing3D
Duck - Hatchling 3d model

Duck - Hatchling

Cinderwing3D
Cinderwing3D
Frog - Hatchling 3d model

Frog - Hatchling

Cinderwing3D
Cinderwing3D
Koi - Hatchling 3d model

Koi - Hatchling

Cinderwing3D
Cinderwing3D
Lizard - Hatchling 3d model

Lizard - Hatchling

Cinderwing3D
Cinderwing3D
Bumblebee Dragon 3d model

Bumblebee Dragon

Cinderwing3D
Cinderwing3D
Baby Bumblebee Dragon 3d model

Baby Bumblebee Dragon

Cinderwing3D
Cinderwing3D
Birthday Cupcake Turtle 3d model

Birthday Cupcake Turtle

Cinderwing3D
Cinderwing3D
Whatchamahoozit 2026 3d model

Whatchamahoozit 2026