Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6223484.

Tried printing the original to use on my Citadel Files, came up a bit too loose. I've created tighter holes that the files fit more snugly in...fair warning they might need some grunt to get in, so feel free to tweak with the hole size, the diameter of the hole at present is 3.3mm



Citadel File Handles

This is the Scatter Gun from Jak 2 and Jak 3. It's a WIP so it's not intended to be 3D Printed yet, but it's at a stage where I'm ok with folks having a play with and seeing if they can make it real.

Jak and Daxter - Scatter Gun

This is the Blaster from Jak 2 and Jak 3. It's a WIP so it's not intended to be 3D Printed yet, but it's at a stage where I'm ok with folks having a play with and seeing if they can make it real.

Jak and Daxter - Blaster

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4923196.

Another WIP Prop that I hope I'll eventually finish at some point. This is the Lacerator, one of the guns from Ratchet and Clank: Size Matters, and Secret Agent Clank.

Ratchet & Clank - The Lacerator 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4825700.

Still working on this, but it's been going on for so long that I felt I might as well show what I've done thus far.

Samus Returns inspired Arm Cannon

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4980586.

Might be a bit snug, but it works with mine.

EDIT: This was originally uploaded on October 3rd 2021, but for some odd reason was invisible, I've republished this and hopefully now it's visible.

Game and Watch Stand - Mario 35th Anniversary

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4825655.

Replacement foot for a Alesis DM6 Drumset, the hole is 38.55mm diameter, which in practice may be a bit loose, feel free to remix and tighten if that is the case.

Alesis DM6 Foot

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4825669.

Added a 2.85mm peg to the WFC Megs Cannon 3 blast effect by fjschuler to make it compatible with the standard arm cannon used in the Prime 3 Figma Samus figure.

Figma Prime 3 Samus Blast Effect

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5135042.

NOTE: For some bizarre reason clicking "Download All" is giving a 404 error, try downloading the STL file directly in this case as that link seems to work.

Edit of my Mario G&W Stand for the Legend of Zelda Game and Watch.

V2 - Trimmed the front holding segment to accommodate for the change in button layout, original layout was too high and pushes against the "B" button



Game and Watch Stand - Legend of Zelda 35th Anniversary

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4923186.

I made a table-esque shelf using modular shelving that had a 2x2 base, remixed moveit124's design to allow for a center base stand to better support loads and prevent the whole thing from coming apart.

Modular Shelf Base Center Stand

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4923178.

Made a very basic modification to the shelf connectors by moveit124 for the end stands. This mod is nothing elegant or particularly good-looking, but it did the job.

Modular Shelf End Stand

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

ChozoGallifreyan

Achievements

Seedling

Debutant