This is the Scatter Gun from Jak 2 and Jak 3. It's a WIP so it's not intended to be 3D Printed yet, but it's at a stage where I'm ok with folks having a play with and seeing if they can make it real.

Jak and Daxter - Scatter Gun

This is the Blaster from Jak 2 and Jak 3. It's a WIP so it's not intended to be 3D Printed yet, but it's at a stage where I'm ok with folks having a play with and seeing if they can make it real.

Jak and Daxter - Blaster

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4923196.

Another WIP Prop that I hope I'll eventually finish at some point. This is the Lacerator, one of the guns from Ratchet and Clank: Size Matters, and Secret Agent Clank.

Ratchet & Clank - The Lacerator 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4825700.

Still working on this, but it's been going on for so long that I felt I might as well show what I've done thus far.

Samus Returns inspired Arm Cannon

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4980586.

Might be a bit snug, but it works with mine.

EDIT: This was originally uploaded on October 3rd 2021, but for some odd reason was invisible, I've republished this and hopefully now it's visible.

Game and Watch Stand - Mario 35th Anniversary

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4825655.

Replacement foot for a Alesis DM6 Drumset, the hole is 38.55mm diameter, which in practice may be a bit loose, feel free to remix and tighten if that is the case.

Alesis DM6 Foot

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4825669.

Added a 2.85mm peg to the WFC Megs Cannon 3 blast effect by fjschuler to make it compatible with the standard arm cannon used in the Prime 3 Figma Samus figure.

Figma Prime 3 Samus Blast Effect

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5135042.

NOTE: For some bizarre reason clicking "Download All" is giving a 404 error, try downloading the STL file directly in this case as that link seems to work.

Edit of my Mario G&W Stand for the Legend of Zelda Game and Watch.

V2 - Trimmed the front holding segment to accommodate for the change in button layout, original layout was too high and pushes against the "B" button



Game and Watch Stand - Legend of Zelda 35th Anniversary

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4923186.

I made a table-esque shelf using modular shelving that had a 2x2 base, remixed moveit124's design to allow for a center base stand to better support loads and prevent the whole thing from coming apart.

Modular Shelf Base Center Stand

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4923178.

Made a very basic modification to the shelf connectors by moveit124 for the end stands. This mod is nothing elegant or particularly good-looking, but it did the job.

Modular Shelf End Stand

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

ChozoGallifreyan