tracking pixel
ChiTownMonty

LED Edge Lit Base for 2"x6" Subway Tile

by
ChiTownMonty
Follow
Follow
Remix Model
ChiTownMonty
ChiTownMonty
Image 1 of 8
LED Edge Lit Base for 2"x6" Subway Tile 3d model
2D
3D
Makes
LED Edge Lit Base for 2"x6" Subway Tile 3d model
LED Edge Lit Base for 2"x6" Subway Tile 3d model
LED Edge Lit Base for 2"x6" Subway Tile 3d model
LED Edge Lit Base for 2"x6" Subway Tile 3d model
LED Edge Lit Base for 2"x6" Subway Tile 3d model
LED Edge Lit Base for 2"x6" Subway Tile 3d model
LED Edge Lit Base for 2"x6" Subway Tile 3d model
LED Edge Lit Base for 2"x6" Subway Tile 3d model
This model is restricted by licensing terms. 
0 Likes3 DownloadsApril 2, 2022
This model is restricted by licensing terms. 


Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5338890.

This is a Edge-lit LED display base I created for the 2"x6" Ice Beveled glass subway backsplash tiles available at Home Depot that has been Laser engraved.

These tiles are available here for approx $1 each, in a sheet of 14:

https://www.homedepot.com/p/MSI-Ice-Bevel-Subway-11-73-in-x-11-73-in-x-8-mm-Glass-Blend-Mesh-Mounted-Mosaic-Tile-9-6-sq-ft-case-GLSST-ICEBE8MM/302801298

This base takes about 3h:30m to print with the suplied .gcode file. This gcode file (and the corresponding .3mf file) have been tweaked for PLA to provide the perfect print everytime and almost twice as fast as using the default Cura 'Standard' profile.

The button-battery driven LED Lights are available on amazon here and will need to cut down the length to 6" which provides 9 LED's for illumination:

https://www.amazon.com/gp/product/B0852MD6HV

NON-COMMERCIAL USE ONLY

THIS FILE IS NOT FOR COMMERCIAL USE. You cannot use this file to create any product that is sold, traded or bartered for personal gain, monetary or otherwise.

IF YOU WISH TO USE THIS FILE FOR COMMERCIAL PURPOSES PLEASE REQUEST A LICENSE FROM GLC@TFOMONTAGUE.COM

There are 3 included files:

Display Name Plate Stand - LED v13 (Final).gcode (Raw Print File <-- Recommended) Display Name Plate Stand - LED v13 (Final).stl (Raw design file w/no 3d print settings) Display Name Plate Stand - LED v13 (Final).3mf (Cura Project file, preconfigured to print)


0 Likes3 DownloadsApril 2, 2022




This model is restricted by licensing terms. 
0 Likes3 DownloadsApril 2, 2022
This model is restricted by licensing terms.