3DPNSpeakerCover - Infill pattern Grill

#3DPNSpeakerCover Speaker Cover entry - infill pattern grill Note: The STL is a solid cover - tweaks in your slicer will need to be made to print the grill with infill pattern settings

-In your slicer create a cylinder modifier with 156mm diameter and at least 10mm tall centred on the model/buildplate

Apply these settings to the modifier: -Set you Top and Bottom layers to 0 -Set perimeters to 0

• Set infill pattern to you choice (Gyroid and Honeycomb work well) -Set fill density (5% works well for gyroid but you can play around with this setting)