Select a membership plan

Model is included in this plan
Available now

20% off
Personal
$8.00
/ month
when billed annually
  • Download 8 designs of your choice per month from my full catalogue
  • New products every week
  • Save 70% compared to purchasing models one by one
  • STL files for personal use only.

Your support means the world to me! Thanks for allowing me to keep going on this adventure!

This membership is for personal use only. No resale/redistribution of digital STL files is allowed, nor creation of mass production molds from these designs.

All designs offered through this membership are protected by intellectual property rights and are the sole property of Charles Regaud.

Model is included in this plan
Available now

20% off
Commercial Seller License
$16.00
/ month
when billed annually
  • Unlimited downloads from my full library of 80+ STLs & new products every week
  • Commercial License to Sell physical 3D prints of my models
  • Access to product photos so you can start selling right away.

In more detail:

Commercial License

  • You can sell physical 3D prints of my designs anywhere you like. (cancelling this subscription would cancel your license to do so)
  • No resale/redistribution of digital STL files is allowed, nor creation of mass production molds from these designs.

Unlimited access to my full library of STLs

  • Gain access to my full library of STLs
  • At least 4 new designs added every month

TERMS & CONDITIONS:

- Originality in Photography/media:

You'll have access to my original photos/videos so can start selling right away.

However, I'd recommend you'd take pictures of your own prints of my designs.

Your listings will look more unique (and not duplicate of others) and will help you stand out.

- Unique Product Descriptions:

Do not use my original product descriptions.

Your product descriptions must be unique for the same reasons stated above.

- Designer Credit:

Please credit "Charles Regaud" or link back to one of my product pages in your product descriptions. In your Instagram posts of my designs, thanks to mention @charles_regaud somewhere and, as tit-for-tat goes, I'll gladly promote your posts on my profile.

Thanks for supporting my ongoing work!

All designs offered through this Membership are protected by intellectual property rights and are the sole property of Charles Regaud.

or
Thangs Bundle

Want this model? Get it instantly with Thangs Bundle plus thousands of other premium designs from 250+ top creators.

Charles R
CharlesRegaud3K followers
Follow
CharlesRegaud
CharlesRegaud
|
Image 1 of 9
KYOTO  |  Self-Watering Planter 3d model
CharlesRegaud
CharlesRegaud
|
Image 1 of 9
KYOTO  |  Self-Watering Planter 3d model
KYOTO  |  Self-Watering Planter 3d model
KYOTO  |  Self-Watering Planter 3d model
KYOTO  |  Self-Watering Planter 3d model
KYOTO  |  Self-Watering Planter 3d model
KYOTO  |  Self-Watering Planter 3d model
KYOTO  |  Self-Watering Planter 3d model
KYOTO  |  Self-Watering Planter 3d model
KYOTO  |  Self-Watering Planter 3d model
KYOTO  |  Self-Watering Planter 3d model

KYOTO | Self-Watering Planter

Subscribe for access starting at $10 USD
Get access to this model and 105+ more

KYOTO | Self-Watering Planter

Meet KYOTO, a japanese-inspired self-watering planter.

It comes in two sizes, and both sizes have 2 versions of the reservoir/vase:

  • one that has a smooth surface
  • one that has a textured surface.

DIMENSIONS (Small) | Ø 120mm x H 140 mm (neck inner diameter Ø 85 mm)

DIMENSIONS (Large) | Ø 180mm x H 210 mm (neck inner diameter Ø 120 mm)

3D PRINT SETTINGS For a watertight result, make sure your printer is well calibrated and lubricated. Then, increase the wall line count to 3. The wall thickness is 2.4mm, so that makes for 6 wall lines with a 0.4mm nozzle. That's plenty to make it watertight.

Resolution: 0.2~0.3 mm Infill: gyroid ~20% Build adhesion type: 6mm Brim for the Pot. No brim needed for the Reservoir. Supports: None

The planters on the pictures were printed with "fuzzy skin", to give some texture to the surface. To set it up, look for the fuzzy skin feature on your slicer (hidden under "Experimental" settings in Cura). Then:

  • activate "fuzzy skin"
  • tick "fuzzy skin outside only"
  • set "fuzzy skin thickness" to 0.25~0.3mm
  • set "fuzzy skin density" to 1.25mm
  • set "fuzzy skin point distance" to 0.8mm.

Discussions

KYOTO | Self-Watering Planter

105 downloads · 2 years ago in  and 
Charles R
CharlesRegaud3K followers
Follow
Subscribe for access starting at $10 USD
Get access to this model and 105+ more