3D PRINT SETTINGS:
All STL files are already oriented properly.
No supports or adhesion brim needed.

BIN:
The 3d model is full and needs to be turned into a shell by
cancelling the top faces and the infill.
Resolution: about 0.2mm / layer (I printed with 0.3mm/layer)
Perimeter walls / wall lines: 3 lines for a 0.4mm nozzle, 2 lines for a 0.6 or 0.8mm nozzle.
Top face layers: 0
Infill: 0%
Bottom face layers: 3 or 4
Build adhesion type: None
Supports: None

LID:
The lid prints upside-down (STL already oriented properly) and needs regular settings with some infill.
Resolution: about 0.2mm / layer (I printed with 0.3mm/layer)
Perimeter walls / wall lines: 2
Infill: 20 to 30%
Build adhesion type: None
Supports: None