EGGBO | Chessboard print-in-place
Meet EGGBO, a print-in-place foldable chessboard. No assembly required.
It was designed to be printed folded and upright for 2 reasons: 1- Fast printing, as the first layer surface is very small, and there are no flat "top layers". Everything is vertical or at a 45deg angle. 2- Smooth surface, as it prints vertically, so no first or top layers visible.
The double-action hinge prints in place with the rest.
The chessboard comes with a cute custom set of chess pieces.
The magnet holes on each half have a diameter of Ø10.5mm, 2.5mm deep.
Have fun mix-and-matching the colours!
And happy printing!
DIMENSIONS (open) | W 252mm x L 252mm x H 20 mm
DIMENSIONS (closed) | W 252mm x L 126mm x H 40 mm
PRINTING | ~5.5h
3D PRINTING SETTINGS The chessboard prints in place all in one go. It prints folded, with the hinge and middle sections of each half of the chessboard on the printing bed.
Resolution: 0.2mm Build adhesion type: None Supports: None Infill: 15~20% Wall line count: 2 Top layers: Doesn't matter (no flat top layers) Bottom layers: 3