COROA | pendant light E27/E26

Eight modules. One bulb. No tools.

Casting soft woven shadows across the room.

Eight woven modules hook onto a central ring and lock in place using simple printed pins. Vase mode print, no seams, no supports.

All eight shades print from a single 1kg spool: • Each module: ~120g of filament, 1h50 print time • Central ring: ~120g of filament, 2h20 print time

Part of my signature woven collection of 3D printed lighting objects.

DIMENSIONS (assembled) | Ø510 mm × H240 mm EACH MODULE | W196 × L240 x H148 mm

COMPATIBILITY | Prusa MK3/4, Bambu Lab A1 and most 210×250mm+ beds. Not compatible with Ender 3 or A1 Mini

3D PRINT SETTINGS: All STL files are already oriented properly.

They can be printed with either a 0.4mm or 0.8mm nozzle.

You need to print: • 8 modules in vase mode (settings below) • a socket plate, the central ring onto which the modules are mounted • 8 small dovetail locks to secure the modules in position

MODULES: Print them in vase mode (spiralize outer contour / spiral vase).

For 0.8mm nozzle: • 0.4mm layer height • default 0.84mm line width • 12 bottom layers (adjust if using another layer height)

For 0.4mm nozzle: • 0.3mm layer height (ignore the “0.28mm limit” warning) • 0.8mm line width • 16 bottom layers

SOCKET PLATE & DOVETAIL LOCKS: Print them together on the same build plate using standard print settings.

Happy printing!