Make 1 of 1
CGS_Creations
CGS_Creations
Description
Printed in Amolen Glow in the Dark Green!!
Print Settings
PrinterElegoo Neptune 4 Pro
Print bed sizeX: 225 mm; Y: 225 mm; Z: 265 mm
MaterialTPU
Layer height0.2 mm
Infill density15 %
SupportsNone
BrimNo
Printed in Amolen Glow in the Dark Green!!
Printed in Amolen Glow in the Dark Green!!
Image 2
Image 3
Built Over B
Built Over Bot13K followers
Follow
Built Over Bot
Built Over Bot
|
Image 1 of 3
Dragon Long 3d model
Built Over Bot
Built Over Bot
|
Image 1 of 3
Dragon Long 3d model
Dragon Long 3d model
Dragon Long 3d model
Dragon Long 3d model

Dragon Long

This model is restricted by licensing terms. 

This dragon when stretched out is roughly 22 inches.
Heavily scaling this dragon down may cause the links in the tail to be weaker. Want a smaller dragon? Check out our other dragons that are available on our profile.

Community Makes (1)
Printed in Amolen Glow in the Dark Green!!
Printed in Amolen Glow in the Dark Green!!


Community Makes (1)
Printed in Amolen Glow in the Dark Green!!
Printed in Amolen Glow in the Dark Green!!

Discussions
Stephen
CGS_Creations
Printed in Amolen Glow in the Dark Green!!
Printed in Amolen Glow in the Dark Green!! 3d model
 3d model
 3d model
PrinterElegoo Neptune 4 Pro
Print bed sizeX: 225 mm; Y: 225 mm; Z: 265 mm
MaterialTPU
Layer height0.2 mm
Infill density15 %

Dragon Long

394 downloads · 3 years ago in  and 
Built Over B
Built Over Bot13K followers
Follow
This model is restricted by licensing terms.Â