We created a house for our dogs that prints in separate pieces. Please note that this file will need glue for at least the corners and door surround!

For the .stl you need to print one of every item except the roof shingles which will require 2. The Dog House base will need a tree support where the door is located. We recommend printing with 15% gyroid infill.

The corner pieces and the door surround have small pins that line up with dog house base. Please make sure that you install the corners pieces correctly (the corners match the angle of the roof) so that the roof can be put on flush. The Shingle pieces each slide into the roof base with the angle portion of the singles go towards the top. The roof base can be placed on top of the dog house base. You may or may not want to glue down the roof pieces.