Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6228548.

BOTTLE CONTAINER WITH HIDDEN COMPARTMENT (PRINT-IN-PLACE)

Keep your money (or other precious things) safe at home with this container. The bottle container is composed of two hollows: an outer hollow for sugar (~100cc) and an inner hollow for money (~200cc). To make it more realistic, the sugar hollow covers the bottle's top, bottom, and inside. So, when you shake it, you hear a realistic sound of a real sugar bottle.

Watch how it works: https://youtube.com/shorts/tx-vMQIHzhY?feature=share

Features:

• Print-in-Place and no support
• Resizable (select all parts and resize them according to your needs).
• Realistic sound, as if it's full of sugar.
• Two optional bottom caps: -- one with an additional sugar container for more realistic sound and heaviness but less space for money -- one flat cap with more space for money but less realistic sound and heaviness
• Two optional top caps: -- one with holes for sugar pour -- one without holes (to protect sugar from moisture).

Print settings:

• All parts can be printed using 0.28mm layer height with 20% infill and 8 (eight) wall counts to decrease the print time. Increase/decrease wall counts instead of increasing or decreasing infill ratio which will have a significant effect on print time and strength of the bottle.
• No support is needed and you can print all parts in one shot.
• If you choose "the bottom cap with additional sugar container", pause print at layer# ~70 (with layer height 0.28mm which corresponds to ~20mm height) and fill ~80% of the bulb container with sugar using a teaspoon or funnel and continue printing. The top of the bulb will be covered and the sugar will remain permanently inside of the bulb. It will balance the top/bottom weight of the bottle and make better noise when the bottle is shaken.

Post-printing:

-Lubricate the screwing parts with dry soap before first use for smooth opening/close of caps.

CONTACT: In case of any questions, concerns, or comments you can contact me through: botcan3d@gmail.com

DISCLAIMER: THIS BOTTLE IS DESIGNED FOR ENTERTAINMENT PURPOSES AND NOT A PROFESSIONAL SAFE. I HAVE DESIGNED THE BOTTLE FOR MY OWN USE AS A MONEY SAFE AT HOME. IN THIS RESPECT, I ASSUME NO RESPONSIBILITY OR LIABILITY TO ANYBODY OR AUTHORITY FOR ANY LOSS/THEFT OR ANY KIND OF ILLEGAL ACT SUCH AS SMUGGLING OF ILLEGAL OR DANGEROUS MATERIALS THAT MAY OCCUR WITH THE USE OF THIS BOTTLE. THE RESPONSIBILITY RESTS WITH THE USER OF THIS BOTTLE.

Happy printings :) Botcan3d