Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3016825.
This is a housing to hold a Micro SD to Standard SD Card adapter for the Creality CR10\CR10S.
There is a more recent version at the following link: https://www.thingiverse.com/thing:3259429
In this remix I have:
1.Sculpted the component to make the enclosure appear less bulky. 2.Completely reworked design in Fusion 360 to allow the thing to be printed without supports. The thing should be printed sideways and a raft will be necessary to provide stability. 3.Included one card storage slot. 4.Included a Card insertion orientation icon. 5.Included a USB symbol. 6.Angled enclosure around the USB port to make it easier to insert the USB cable.
To make the seating of the SD adapter snug to the housing I have included some interference points on the inside face (see image) these can be shaved if required to allow for any variation in different printer tolerances.
Both things are the same but one has CR10S graphics and the other just CR10.
The SD card adapter I used is at the following link: https://www.amazon.co.uk/gp/product/B01C84YKVA/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1