Sawyer Squeeze Drip Cap

Print in place cap for your Sawyer Squeeze, avoid drips when stored away in your pack. For the unfiltered side of your sawyer squeeze water filter. Print in place swivel so the cap can turn freely and is secured to the filter so you don't lose it. Can use a length of 550 paracord, remove one internal core strand and tie it around the groove of the filter.

3D PRINTING SETTINGS Will attach my .3MF file, but pretty standard settings; FDM 15% infill 2 wall No supports needed Printed in PLA or PETG

If you're happy with the design, and had a successful print, AND you're feeling generous, you can tip me no more than a buck or two on my PayPal:

http://paypal.me/bombastic3D

Appreciate those that do! Thanks