Fixed_AR-15_Bolt_Extractor_Ejector_Jig.stl

A jig to hold the AR 15 bolt while you work on the ejector / extractor. PLA+ 225C 60C, supports yes 55 degrees, infill 100%, walls 4.

Parts needed.
1 spent 5.56/2.23 casing (cut off about 10 mm from the primer side)

1 long bolt and 2 nuts to for in the hole ~18mm nut (super glue/epoxy the nuts in the hole)

Removable_AR-15_Bolt_Extractor_Ejector_Jig.stl

A jig to hold the AR 15 bolt while you work on the ejector / extractor. PLA+ 225C 60C, supports yes 55 degrees, infill 100%, walls 4.

Parts needed.
1 spent 5.56/2.23 casing (cut off about 10 mm from the primer side)

1 long bolt and 2 nuts to for in the hole ~18mm nut

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships

Blue_Dragon168974

Achievements

Seedling

Fixed_AR-15_Bolt_Extractor_Ejector_Jig.stl

Removable_AR-15_Bolt_Extractor_Ejector_Jig.stl