A jig to hold the AR 15 bolt while you work on the ejector / extractor. PLA+ 225C 60C, supports yes 55 degrees, infill 100%, walls 4, .15 res

Parts needed.
1 spent 5.56/2.23 casing (cut off about 10 mm from the primer side and attach this to the end of the bolt to push the ejector in)

1 long bolt and 2 nuts to for in the hole ~18mm nut (super glue/epoxy the nuts in the hole)

Fixed_AR-15_Bolt_Extractor_Ejector_Jig.stl

A jig to hold the AR 15 bolt while you work on the ejector / extractor. PLA+ 225C 60C, supports yes 55 degrees, infill 100%, walls 4.

Parts needed.
1 spent 5.56/2.23 casing (cut off about 10 mm from the primer side)

1 long bolt and 2 nuts to for in the hole ~18mm nut (super glue/epoxy the nuts in the hole)

Removable_AR-15_Bolt_Extractor_Ejector_Jig.stl

A jig to hold the AR 15 bolt while you work on the ejector / extractor. PLA+ 225C 60C, supports yes 55 degrees, infill 100%, walls 4.

Parts needed.
1 spent 5.56/2.23 casing (cut off about 10 mm from the primer side)

1 long bolt and 2 nuts to for in the hole ~18mm nut

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

Blue_Dragon168974

Fixed_AR-15_Bolt_Extractor_Ejector_Jig.stl

Removable_AR-15_Bolt_Extractor_Ejector_Jig.stl