Organization

Ornaments

Printing Tools

Here are four different options for mounting the Everything Presence One (EP1) or Everything Presence Lite (EPL) sensors to Multiboard tiles.

The options are:

- Push-Fit
- Small threaded
- Mid size threaded
- Big threaded

Print these with at least 50% infill (I printed mine at 100% infill) for added strength.

Multiboard Mounts for Everything Presence One and Everything Presence Lite

Multiboard_EPL_Snap_Mount.stl

Remix of ZombieHedgehog's Screwfinity Medium Drawer with four compartments.

April 9, 2024 - Minor update to adjust the front to back divider.
Discovered in my test print that the forward portion of the divider wasn't connected to the front part of the drawer.

Screwfinity Drawer Medium Wide with Four Compartments

Screwfinity Drawer Medium Dividedx4.stl

Remix of ZombieHedgehog's Screwfinity Medium Scoop Drawer with Divider.

Screwfinity Drawer Medium Wide Scoop with Divider

Screwfinity Drawer Medium Wide Scoop Divided.stl

Flat surface mounting option for the ThirdReality Temperature and Humidity sensor.

Instead of using 3M VHB tape or command strips to attach the mount to a wall or other flat surface, you can use a small screw such as a #8 screw to attach the mount to a flat surface.

Using these mounts means that you don't have to attach 3M VHB tape or command strips to the actual sensor.

ThirdReality Temperature and Humidity Sensor Stand with screw hole

ThirdReality Temperature Humidity Stand Hole.stl

Flat surface mounting option for the ThirdReality Temperature and Humidity sensor.

You can use 3M VHB tape or command strips to attach the mount to a wall or other flat surface.

Using these mounts means that you don't have to attach 3M VHB tape or command strips to the actual sensor.

ThirdReality Temperature and Humidity Sensor Stand

ThirdReality Temperature Humidity Stand.stl

Remix of ZombieHedgehog's Screwfinity Medium Drawer with a Divider.

April 9, 2024 - Minor update to adjust the divider.
Discovered in my test print that the forward portion of the divider wasn't connected to the front part of the drawer.

Screwfinity Drawer Medium Wide with Divider

Screwfinity Drawer Medium Wide Divided.stl

A remix of the Argon40 ONE Raspberry Pi Case Dual Stand created by jerryfudd.
https://www.thingiverse.com/thing:4789547

This version was simply made a little bit taller in order to be able to hold two Argon ONE M.2 Raspberry Pi 4 cases, two Argon ONE V2 Case for Raspberry Pi 4, or a combination of the two cases.

The case is tall enough that the pockets at the rear can hold 2.5 inch SSD drives or 2.5 inch hard drives.

Argon40 Case https://www.argon40.com/argon-one-v-2-case-for-raspberry-pi-5.html
Argon40 M.2 Case https://www.argon40.com/argon-one-m-2-case-for-raspberry-pi-4.html

PRINTING SETTINGS
0.20 resolution

The original case called for 20% infill.

I chose to use 10% "two line" infill, a trick I recently learned from CHEP which adds strength while saving some plastic.

It's best to rotate the design so the back of the case is flush with the build plate.

Argon ONE m.2 Dual Stand

Argon_ONE_Dual_Stand.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

BlackRose67

Achievements

Seedling

Voyager

Shooting Star

Accomplished Maker

Debutant