Hextraction - Rocky Gutters (Expanded Boards)

I made a gutter system that fits aesthetically with the woodland themed hextraction board.

I designed it in chunks so that it can help connect board pieces that need to be printed on smaller print beds (but that means this can't be printed on really small beds... sorry)

Naming of the files L = Left C = Center R = Right Top = Obvious Bottom = Duh

There's holes on the left and right strips to accommodate future gutters that I plan on making shortly.

There's also two holes on the bottoms of both the left and right top pieces. These are 3.75 mm wide so that heat insert nuts can be placed here for legs (I still need to design those) which are in the part list.

I uploaded this early because I shared my progress to the hextraction community and caved under pressure to release what I currently have.

Here's the F360 file: https://a360.co/45QbWcR

Note: I'm a novice F360 user so my timeline is probably sloppy as hell.

UPDATE: I added the mounts for the legs and a simplistic leg design that I quickly threw together because I was in a rush to have a working board. I'll probably make a more decorative design for the legs down the road.

You'll need two M4x40mm bolts and nuts for the swivel legs and M3 bolts to attach the legs mounts (and M3 heat insert nuts to attach it to the bottom).