I'm thrilled to share this festive design in honor of Mexican Independence Day: a 3D printed Mexican flag magnet.

This small but impactful magnet is a great way to add a touch of patriotism to your fridge, locker, or any magnetic surface. It's easy to print and requires no supports. Simply attach a small magnet to the back, and you're ready to celebrate!

I used the AMS system to print this colored, using painting mode in Bambu Studio. 

I designed this model with love for my country and its rich history. I hope it brings you joy and reminds you of the spirit of independence.

**Buy me a coffe**
I like to share my work for free, but if you enjoy my work and would like to support it and are able too, you can do so through my buy my a coffee page. It will be greatly appreciated! =) 

buymeacoffee.com/b34rl0rdf

**¡Viva México!**

Bandera mexicana imán - Mexican Flag Magnet

BanderaMexico.stl

Hey everyone! 👋 I'm excited to share my latest kitchen gadget to speed up your meal prep: the Upside-Down Bottle Holder & Tray! I'm a Mexican and as any good Mexican I love my sauces, but I hate it when it's nearly impossible to get my sauce from the bottle.

Tired of waiting for that last bit of ketchup, dressing or sauces to slowly drip out? This 3D printed solution keeps your bottles inverted, ensuring those thicker sauces and dressings are always ready to go.

Upside-Down Bottle Holder & Tray

UpsideDownBottleHolder.stl

Hello there! I'm thrilled to share my latest creation: a custom resource organizer I designed for a game called Hitodama. It can work for other resource based games too!  This insert features six smaller compartments for tokens and two larger ones for larger tokens and meeples, all snugly fitting within the original game box.

I designed this organizer to replace the bags it came with, keeping everything neatly organized and easily accessible. I figured the space might be too small to allow comfortably reaching the smaller tokens, so I included a small insert for the smaller containers that allow you to easily lift the resources. 

**Important Note: Before printing, please double-check that the organizer's dimensions will work for your chosen game box. The dimensions are 160x60x40mm.**

Please share your prints! I would love to see it in use. Happy gaming! =) 

Boardgame Resource Organizer with Lid - Hitodama

HitodamaOrganizer.stl

Hello world! 

You probably have heard about the Global IT Outage that happened because of a faulty update on some Microsoft systems, causing havoc worldwide. Delayed flights, offline banks…overall a huge mess, hehe. That's why I designed this "Global IT Outage Survivor Medal" to commemorate our collective resilience with a bit of sense of humor. I know many of us are still facing the aftermath of this little gift we received from Crowdstrike, so maybe a little token can help us deal with the stress this has brought. 

This medal is the perfect way to show off your IT prowess and bring a smile to your colleagues' faces. Print it in your favorite colors and wear it with pride!

As always, I'm happy to share this model with you.

 Share photos of your printed medals – I'd love to see them!

Happy printing (and may your systems stay online)!

Global IT Outage 2024 Survivor Medal

GlobalOutageMedal2024v4.stl

Hi there!

I designed this practical 3D printable keyholder that features a sleek design with two trays to keep your keys and small everyday items organized. Easy to install with screws or adhesive strips.

UPDATE (9-Apr-24): Improved version. Now there are 3 variants availabe.

There are 3 variants:

“Catch all wall tray - nails” | You need two small nails or screws to install it.
“Catch all wall tray - double sided tape” | You need double sided tape to install it.
“Catch all wall tray - single screw” | It fits a single, larger screw in the middle, needed to install it.
Pick your variant depending on how you wish to install it on your wall.


I added some hexagons to make it look a little better. Overall, I like the design, and it works perfectly for what I needed. It doesn't require supports. I hope it works for you too! Happy printing!

 

P.S. I suggest printing the hexagons on a different color if you have an AMS ;)

Wall-Mounted Keyholder with Dual Trays - with Hexagons!

catch all wall tray - nails.stl

Elven dice tower. it fits 20mm D20s. Print-friendly design, tested and ready for your tabletop!

Add a touch of Elven magic to your next game night with this dice tower. Inspired by the graceful lines of Elven cities. It fits your standard 20mm dice and it delivers a smooth, satisfying tumble every time. It might fit larger dices. 

It can be printed without supports. I tried to be careful about the little details that make it easy to print without the need of supports. Steps are angled to ensure a smooth roll but also to allow more tumbling. 

 


You can also scale it down to make it smaller and save material. It will still fit standard 20mm dice at 85% but it will be a tighter fit.

This project was harder than I expected, it's outside my comfort zone. It took more tries than I would like to admit. It took several trial and errors to get it just right, as you can see here:


Huge thanks to X's users gonecozy, 3D_Musketeers, kwalddesign, 2ndLayerPrintin, stefjohnzz and MartinSirakov3 for their amazing support and feedback – this tower wouldn't be the same without you! You can find the thread that helped me fix some issues I was having with this design here:

https://x.com/Bear3DTek/status/1786478933564695016

Elven-inspired dice tower

TowerTop120-V5.stl

Hello! 

I needed to make a few holes around the house to make some installations and dust was an issue. Decided to design my own guide and dust collector to make it look the way I wanted.

It doesn't need supports! =) 

Hi again! I read some of the feedback on the original design and decided to improve the dust collecting capabilities of the drill guide. I will keep both files available, here is a small guide to let you pick which one you want:

drill guide with dust collector.stl This file is the original design. I personally think this one looks better, but it suffers from some dust collecting issues (some of the dust gets stuck in the main guide and in some other parts of the guide).

drill guide-improved dust collecting.stl This file has the improved dust collecting capabilities. The changes are described below.

UPDATE (2022-10-26): Improved dust collecting design. Made an opening on the main guide to allow dust to fall into the container, as illustrated here:


Also, I included some chamfers in the horizontal axis, since dust was getting stuck there as well. 


 

Thanks to everyone that has provided useful feedback! Will keep reading the feedback to continue to improve my designs. 

Drill Guide V2.0 Bear - No supports

improved drill guide.stl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4461459.

Hello there! 

I designed this organizer to keep different type of banknotes organized. It is made for Mexican banknotes, but I tried a couple of USD and it worked just fine. Most banknotes around the world are around the same size. 

The design was made to be printed without supports and raft. It also reduces material usage. This was an easy print, at least on my printer (Flashforge Guider IIS). All slopes are under 55 degrees. 

This design is modular, you can attach the organizers to each other. 

Enjoy!

Banknote organizer

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3868638.

Hello! =)

I made this tray for my external dvd drive. I wanted to unclutter my desk so I made this so that it attaches to the underside part of my main desk. 

It works perfectly. The external dvd drive I use is a samsung that measures 144mm by 147mm and is 22mm high.

My desk has 20mm metal profiles holding it together and I used those to attack the tray, no tools or glue required. 

Printing does require supports AND a raft. 

External DVD Tray for crystal desktop

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4547793.

Hello! 

I designed this peg for these solar lamps because the pegs on them kept breaking.

This is a rugged design, so it should last longer than the included pegs. After a few tries this design was the one that worked the best for me. 

Some of the key points that I was looking for and were met by this design were: Easy to insert into the ground, resistant, tight fit and, as a bonus, it looks cool.

These pegs work for garden solar lamps that are 57mm in diameter. 

I hope this helps someone =) it might save you a few bucks instead of having to buy a new lamp you can just print the peg and keep using it. 

It was designed print-ready, no need for rafts or supports. 

For more designs like this one, follow me on twitter:

https://twitter.com/bearlord

Enjoy! =)

Peg for garden solar lamp


Hi there! 

I designed this desk organizer and wanted to share it. It has room to place a smaller print with your logo or name in the front and it has room for many microSD cards and SIMs. Most designs have few micro SD slots so I decided to make my own. 

It is designed thinking on low material usage. It has a rugged style design that I really like. 

Some of the key points that I was looking for in this design: Easy to print, efficient use of material, good looks (this is subjective and personal) and meeting my own requirements. 

It was designed print-ready, no need for rafts or supports.

Enjoy!

bear desk organizer

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3822760.

Hello there, Bear here.

I designed this hook to be able to organize Ethernet cables in a standard Tripp Lite server Rack. The hook fits in the squared holes in the rack so that you can place them as you need them.

Works great to organize cables in our site. I use the hooks horizontally and run the cables vertically. 

It was designed to not need supports nor rafts. 

SITE RACK CABLE HOOK WITH CLIPS INSTEAD OF NEEDING SCREWS

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4420978.

Hello! 

I designed this wall mount for the Ubiquiti AmpliFi HD router. I wanted something easy to print, with no supports needed and easy to install. It includes a bit of cable management featuers. 

I think it looks okay and it works just fine. 

Enjoy!

Amplifi HD Wall Mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5040399.

Hi there! 

Cats broke their cat planter friend. It was a gift from my mom. Of course it needed a broken leg cast to fix it. #3dprinted

I doubt it will be useful to anyone unless you have the exact same cat planter and it gets broken in the same exact way... but who knows, maybe it will help someone someday.

Broken kitty planter leg cast

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3784356.

I lost my Gigabyte ECO600 wireless mouse battery cover a while ago. Finally made a replacement. 

It took 3 tries to finally get it to fit nicely. 

Settings:

Supports: no
raft: no


Gigabyte Eco600 Battery Cover Replacement

MainTower-V3.stl

Gates.stl

catch all wall tray - double sided tape.stl

catch all wall tray - single screw.stl

HitodamaLid.stl

HitodamaSliderV3.stl

UpsideDownBottleHolderTrayV2.stl

UpsideDownBottleHolder.3mf

UpsideDownBottleHolderSmall.stl

Hello! 

I am just a bear who loves 3d printing. 

Engineer. Maker. =) 


Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Bear3DTek

Achievements

Seedling

Debutant

Novice Maker

Pinned models

Elven-inspired dice tower

Wall-Mounted Keyholder with Dual Trays - with Hexagons!

Boardgame Resource Organizer with Lid - Hitodama

Upside-Down Bottle Holder & Tray

Bandera mexicana imán - Mexican Flag Magnet

Upside-Down Bottle Holder & Tray

Boardgame Resource Organizer with Lid - Hitodama

Global IT Outage 2024 Survivor Medal

Wall-Mounted Keyholder with Dual Trays - with Hexagons!

Elven-inspired dice tower

Drill Guide V2.0 Bear - No supports

Banknote organizer

External DVD Tray for crystal desktop

Peg for garden solar lamp

bear desk organizer

SITE RACK CABLE HOOK WITH CLIPS INSTEAD OF NEEDING SCREWS

Amplifi HD Wall Mount

Broken kitty planter leg cast

Gigabyte Eco600 Battery Cover Replacement