Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5690459.

pronounced: E M T (double) Z

Cartesian 3D printer This started out in life as one of the BEST and cheapest ways to get a metal framed Anet A8 3D printer. EMTdubLZ has turned into a complete DIY custom printer frame with the availability to custimize as you see fit. Most if not all Anet A8 files on carriages and or the bed from around the net should be usable. It has been design to be way overkill in the ways on stability. 2x10' of 3/4" EMT tubing ( you'll have a good length left over for other fun projects !) 75x #10x3/4 metal self-tapping screws - (https://www.amazon.com/ 3cyaun0) a spool of your preferred filament2 Z axis supports that are staggered front to back and left to right providing a more rigid frame. Takes some measuring to get everything square but, when done correctly this is a super stiff frame. PSU, display and motherboard mounts are up to you since there are so many different varaitions out there now. Derived from the original EMT8: https://www.thingiverse.com/thing:2818084 Printed parts: Two of each: frame-corner-v2-fl_rr.stl frame-corner-v2-fr_lr.stl everything else should need only one. 8mm smooth rod cuts: 2x 436 mm X axis 2x 380 mm Y axis 2x 380 mm Z axis EMT pipe cuts are as follows: X: 3x 313mm Y: 2x 364mm Z: 4x 443mm Designed for a build volume of 220x220x240 but can be scaled in either direction.