Is it a gingerbread house? Is it a holiday factory? It is BOTH!
My 2024 holiday display: The Gingerbread factory is now available for download. There are 3 different sizes available dependent on how big your printer can print the parts!
This model is free until December 1st, 2024 and then will be putting it in a exclusive premium folder for pay so download it today!
This model comes in a kit style build, which means you can print all the parts individually and then put the display together! Use a multi color/tool printer to color/decorate you parts or use a single tool printer to decorate your parts post printing, maybe with a 3d pen or some acrylic paint markers! It's up to you how your display comes to life!
Printer Setting Recommendations
"Most" part files have been designed for a single tool machine that can handle color swaps so you can get the visual effects in your prints. The stained glass window pieces all have sections that are different layer heights, so with some help with your slicer, you can do color swaps and get the multi-color stained glass window effect.
File designation: I tried to zip each grouping of model sizes to no avail, thus each part has a number designator (250, 300, or 350). There are 23 parts for each sized kit. Please use parts with all the same number at the end or parts wont fit/look right,.
250 kit-parts fit printer with a 250x250mm bed 300 kit-parts fit printer with a 300x300mm bed 350 kit-parts fit printer with a 350x350mm bed
CAUTION: if printing on a smaller bed than 250x250, use the 250 parts folder and scale down from there. While parts should scale down and tolerances should work, I can't guarantee parts will print well smaller than the 250x250 size as this was designed for a minimum bed of 250x250. This size has been tested but not smaller. Print at your own risk.
Every part only needs printed once, with exception of garland. The garland needs 2 printed for the full assembly.
**Layer height settings: ** 250 parts- 0.15mm layer height 300 parts- 0.15 or 0.2mm later height 350 parts- 0.2mm layer height
Infill the clock insert, staircase, and all stained glass window pieces should be printed with 100% infill. All other pieces can have infill at discretion.
Any comments questions or concerns, please leave a comment and I will help as I can.
Happy Holidays!