The Airbrush adapted for an inhaler engine worked as shown in the video - https://www.youtube.com/watch?v=BTupVFawxLs&t=3s

Airbrush adapted for inhaler engine UPDATE Guys, the previous model was made to help set a right angle for spraying the nozzle. This model is now set to work at 90 degrees (blower nozzle and ink fountain nozzle), thus eliminating the need for screws and nuts and the rear hole was deeper for better support of the support cable. I bought this basic airbrush to start with painting 3D printed pieces, but as I don't have a suitable compressor, I chose to design and adapt a new airbrush for an inhalation device with a capacity of up to 50PSI.

So I took advantage of some parts of the purchased model, since it didn't work with the pressure of the inhaler.

The Airbrush adapted for an inhaler engine worked as shown in the video.

To download the blower nozzle file, I ask you only for a small contribution to encourage my work with 3D creations and modeling. For this, access https://www.elo7.com.br/4E0AAA, if you prefer, you can also write to the e-mail vonagoog@gmail.com, with the subject "BICO BLOWER".

Thanks!