Print them like in the picture, standing. I used pla, but probably something that resists at a higher temperature is better.



Renault wheel cap

Replaced the strain gauge with the light sensor found down on the left column of the printer.

wired to an skr mini E3 v3.0

I printed it on it's face, with some supports (if i remember correctly) out of petg.

The stick needs some metal glued on it's side to properly and accurately interrupt the signal of the sensor. Wrapping alluminum might work, but until a friend told me this, i already cut a little rectangle from a beer cap lying around my room.

The screws are all original, i mean from the printer somewere

Finally I start trusting this printer now.

hotend support, with Z probe for cr-10 smart

Hotend support v1.3mf

Printed on one side, standing, with supports. Pretty finnichy to find a good orientation where the supports go straight to the part they should support, but the knob works, i still use it after more than a year. I printed it with pla

Front Seat Adjustment Knob Wheel Polo 9N

The first model was right against the fan but it was laud. 
This version leaves the fan some room

Protection grill for 40mm hotend fan

Fan shrowd.3mf

This is for the cr-10 smart printer, it replaces the white plastic between the heatsink and the fan. 
It does not let air to be blown under the heatsink, hitting the hotend. 
And it has a support that anchors on the metal bracket so that the hotend is not pushed down when the filament is extruded.
I used Petg, hope it lasts.

cr-10 Smart hotend fan support

Replacement extruder for the Cr-10 Smart. It requires screws, filament bearing and ptfe tube holder, from the original extruder. 
I made this because the original one broke.
I printed it with petg, 4 walls, grid infill, 20%. My printer can print the tensioner M5 screw, hope yours can too. Lubrication helps. Kitchen oil works fine. It is in the position i printed them, used support only where touching the bed.

Extruder for Cr-10 Smart.

Base.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Adelin-95

Achievements

Seedling