Remix of arrowsmith206's design on Thingiverse since I had some issues with it. I'm currently running it in my M6 Carbine with good results

Changes:

• Tightened C-clip spacing
• Added printed holes for pins I still recommend drilling these out but simply drilling the whole thing seemed imprecise
• Changed miscellaneous tolerances The tolerances air on the side of needing to file rather than shim so finishing touches are required
• Modeled tensioning screw since mine broke. Subject to change as the printed one broke too, design may be updated in the future
• Added holes for the rubber nubs which are not present on the base model, leading to double feeds

Advice:

• Print standing on the rear, don't support small surfaces which can be bridged
• Take your time with post-processing and make sure everything fits snug
• Find a C-clip which fits your barrel well, any play will degrade results. The design still fits standard AEG clips
• Remember to lubricate any contact surface but keep the bucking's patch clean

Other:

• Feel free to write me a message or leave a comment me if you have an issue or question. If you need minor changes to the model but can't make them yourself, I may be able to help
• CAD files are not available, changes were made in Blender
• Commercial use of the model is prohibited

Happy Airsofting!