An amp handle for a Yamaha SM12H 11 PA speaker.

YamahaPAHandle v2.stl

For reddit gridfinity

GridBin2x6x6Smooth.stl

Test your dimensional accuracy against known items. Also handy for approximating how large to make screw holes in your designs.

Metric Hole Test v1.stl

An extra thin version of the minimal base plate*. Uses about half the filament as the standard 4x4 baseplate. Smooth underside.

If you want other sizes (eg 5x3, 2x4) use the .f3d file in Fusion 360 to change the rectangular pattern. Or maybe message and ask me nicely :) 

*Minimal base plate =  What you get when bare gridfinity frames meet magnet baseplate.


Thinner Minimal Baseplate 4x4.stl

An extra thin version of the minimal base plate*. Smooth underside.

*Minimal base plate =  What you get when bare gridfinity frames meet magnet baseplate.

What you get when bare a gridfinity frame meets a magnet baseplate and they fall in love and live happily ever after in your tool drawer. Saves about 25% filament compared to the standard baseplate of the same size (more, if you use a lot of infill). Smooth underside.
If you want other sizes (eg 5x3, 2x4) use the .f3d file in Fusion 360 to change the rectangular pattern. Or maybe message and ask me nicely :) 

Minimal Baseplate 4x4.stl

What you get when bare a gridfinity frame meets a magnet baseplate and they fall in love and live happily ever after in your tool drawer. Smooth underside.

This is a set of two caddies, the original, and one at 66% scale. The former uses M3 machine screws to attach the handle, the latter uses M2s. 

**Larger basket measurements:**
 160mm x 245mm by about 103mm high at the grommet. 

**Smaller basket measurements:**
95mm x 161.65mm by about 68mm high.

If you don't have screws, check out [this set of printables](https://www.thingiverse.com/thing:193647).

The larger basket was designed to be about the largest that I could print on a QQ-S delta printer, the length being  245mm. I recommend using wide interior wall lines and a small amount of gyroid infill. Warning: The **smaller** basket will take over 8 hours to print on an Ender 3 with .3mm layer height. A delta printer can do it in around 3.5 hours.


Condiment caddy optimized for 3d printing

Caddy v2.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Ace G

Achievements

Explorer

Seedling

Fan Favorite