My attempt at a centrifugal blower fan, as opposed to my previous attempt at a centrifugal compressor fan. I did not get a chance to test this yet, however I have printed it and can provide information on printer settings.

Supports: Yes, on the impeller, tree supports recommended
Layer height: 0.2mm
Max print speed: 300 mm/s
Material: PLA or PETG, depending on how big you plan to print this

Assembly: The impeller was designed to fit on a 2mm brushless motor shaft, however my tolerances are bad and you may be able to fit this on a 1mm hobby motor like the last one with some super glue or hot glue. Insert the motor shaft through the hole in the housing, fit the impeller onto the shaft and fix it with some hot or super glue, and put the top in place and use super glue to fix and seal it in place. Then, to keep the motor in place, attach it to the motor mount with 2mm screws (they should have come with the motor itself) and glue the mount to the back of the housing.

The motor intended for use is an A2212 1500KV brushless DC motor however the impeller can be modified to fit the shaft of a normal 1mm hobby motor. 

I have not been able to find the flow rate because I don't have the tool to do so. If any of you have a handheld anemometer, I'd love to know what it is!

/3xion

Centrifugal Blower Fan

impeller (1).stl

A quick centrifugal fan design I made. I attempted to make a bell inlet however I did it wrong and it didn't change anything. Decent airflow rate.

Impeller attaches to a generic brushed hobby motor that is mounted to the back of the housing, with the rotor shaft sticking out through the hole in the back of the housing.

Impeller mounting hole may need to be drilled out due to lack of tolerance. Use a 1mm drill bit, or a drill bit appropriate to the size of the shaft of the motor you're using. 

Centrifugal Fan

housing.stl

inlet.stl

impeller.stl

blowertop.stl

blowerhousing.stl

motormount.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

3xionThangs

Achievements

Explorer

Seedling

Pinned models

Centrifugal Fan

Centrifugal Blower Fan

Centrifugal Blower Fan

Centrifugal Fan