This twisty fidgety toy transforms into a heart with a magnetic snap.
This fidget is based on the Lovely Puzzle Box
Chose from four styles or mix and match!
- Indent with hole
All styles come in three versions
- 3x3mm magnet hole
- 6x3mm magnet hole
- 10x2mm magnet hole
Three peg versions are available
- Tight (0.125mm clearance)
- Medium (0.25mm clearance)
- Loose (0.375mm clearance)
All parts can be printed without supports.
Add a brim if bed adhesion is a concern - especially for the tall pegs.
Glue magnets into the dedicated holes. Make sure the orientation of each magnet is set to attract the opposite side of the fidget - regardless of which shape it's in.
Insert a peg into the center hole. Glue is not necessary, but if you do glue it in, only glue one side.
- New magnet size - 10x2mm magnet
- New extension parts for a longer fidget!
Can I sell copies of this?
Yes! This project was shared under the Creative Commons - Attribution license.
This license allows selling copies, but you must provide proper attribution, as detailed in the license itself.
Please note that any other projects linked here (remixes or related projects) may have a different license. Please respect those licenses.