This is the Pear-fect Pass Through Fidget for all the pear lovers in your life 🍐 I designed two styles: a pear with a closed bottom and a pear with an open bottom for the core to pass all the way through.:)

3D PRINT SETTINGS Layer Height 0.2mm PLA works great 15% Infill *Supports for the Pear Core with Leaf

Dimensions of Pear assembled: 3 1/2 in. x 2 1/4 in.

I’ve included a 3mf file for multi-color printers with the following print profiles: Print Plate #1 (Pear body closed bottom): one color Print Plate #2 (Pear core for closed bottom pear): two colors, supports added for leaf Print Plate # (Pear body open bottom): one color Print Plate # (Pear core for open bottom pear): one color

If you are not using a multi-color print, you can print the pear core in multiple colors by pausing the print at layer height 74mm (layer 370) to switch the filament to a different color (see photo)

Have fun printing!! Erin