This might be the only time you enjoy bouncy broccoli 🥦 It's definitely more fun to play with than eat:)

3D Print Settings: Layer Height 0.2mm PLA works great 15% Infill No supports needed

Dimensions of assembled broccoli fidget: 2 1/8 in. x 1 3/4 in.

Optional When printing the broccoli head you can use the ‘fuzzy skin’ feature in your slicer program to give it more texture (see pictures): In PrusaSlicer go to Print Settings > Layers and Perimeters > Fuzzy Skin > outside walls In Bambu Studio go to ‘Others’ tab > Special Mode > Fuzzy Skin > Contour In Cura go to Print Settings > Experimental > (select)Fuzzy Skin, (select) Fuzzy Skin Outside Only

I am also including a 3mf file with the following print profiles: Print Plate #1: Broccoli Head, 1 color Print Plate #2: Broccoli Stem, 1 color Print Plate #3: Broccoli Garden bed of dirt, 1 color Print Plate #4: Broccoli Garden planter box, 1 color

Assembly: Insert the top of the stem (spiral portion) into the base of the broccoli head. You can secure with a little superglue if needed.

Have fun printing!