A set of adapter boards for upgrading Anycubic 4MAX PRO electronics on LERDGE Z:

for the control board;
for the module to increase the heating power of the hotbed;
for the power management module; >>>> !!! unaccounted errors have been corrected !!!
for display module (DONE)
for fan plug and Z-axis optical sensor.

Print Settings
Rafts:
No
Supports:
No
Resolution:
0.3...0.35
Infill:
20%
Filament material:
PLA

Notes:
The calculation of the shrinkage of the landing dimensions for printing PLA is made.
Threaded holes do not need additional processing with a tap.
Before installing Module 2, it is better to use a thin 2-sided adhesive tape.
Before installing the motherboard, it is necessary to make a small cut in the slots of the USB printer frame and in the side cover.
Install the mother on the adapter, then into the printer case.
The adapter for display module print with a resolution of 0.15...0.2 mm.

A set of adapter boards 4MAX PRO>>>LERDGE Z

ANYC-IN-LERDGE_MB.STL

Adapter for installing a BMG extruder on Anycubic 4MAX PRO with fast and full access to the filament feeding mechanism.
To measure and correct the shrinkage of the material, it is desirable to print the first 3 ... 4 layers.
Print Settings
Rafts:
Yes

Resolution:
Dynamic 0.2...0.3 mm

Infill:
20%

Filament brand:
ANY


Filament material:
ABS GF4

BMG 4MAX PRO

ANYC-EXTR-ADAPTER.STL

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

3DPU

Achievements

Seedling

A set of adapter boards 4MAX PRO>>>LERDGE Z

BMG 4MAX PRO