tracking pixel
Vladimir A

A set of adapter boards 4MAX PRO>>>LERDGE Z

by

3DPU

Follow
Follow
Remix Model
Like
3DPU
3DPU
Image 1 of 18
A set of adapter boards 4MAX PRO>>>LERDGE Z 3d model
2D
3D
Makes
A set of adapter boards 4MAX PRO>>>LERDGE Z 3d model
A set of adapter boards 4MAX PRO>>>LERDGE Z 3d model
A set of adapter boards 4MAX PRO>>>LERDGE Z 3d model
A set of adapter boards 4MAX PRO>>>LERDGE Z 3d model
A set of adapter boards 4MAX PRO>>>LERDGE Z 3d model
A set of adapter boards 4MAX PRO>>>LERDGE Z 3d model
A set of adapter boards 4MAX PRO>>>LERDGE Z 3d model
A set of adapter boards 4MAX PRO>>>LERDGE Z 3d model
A set of adapter boards 4MAX PRO>>>LERDGE Z 3d model
A set of adapter boards 4MAX PRO>>>LERDGE Z 3d model
A set of adapter boards 4MAX PRO>>>LERDGE Z 3d model
A set of adapter boards 4MAX PRO>>>LERDGE Z 3d model
A set of adapter boards 4MAX PRO>>>LERDGE Z 3d model
A set of adapter boards 4MAX PRO>>>LERDGE Z 3d model
A set of adapter boards 4MAX PRO>>>LERDGE Z 3d model
A set of adapter boards 4MAX PRO>>>LERDGE Z 3d model
A set of adapter boards 4MAX PRO>>>LERDGE Z 3d model
A set of adapter boards 4MAX PRO>>>LERDGE Z 3d model
This model is restricted by licensing terms. 
0 Likes4 DownloadsJanuary 5, 2022
This model is restricted by licensing terms. 


A set of adapter boards for upgrading Anycubic 4MAX PRO electronics on LERDGE Z:

for the control board; for the module to increase the heating power of the hotbed; for the power management module; >>>> !!! unaccounted errors have been corrected !!! for display module (DONE) for fan plug and Z-axis optical sensor.

Print Settings Rafts: No Supports: No Resolution: 0.3...0.35 Infill: 20% Filament material: PLA

Notes: The calculation of the shrinkage of the landing dimensions for printing PLA is made. Threaded holes do not need additional processing with a tap. Before installing Module 2, it is better to use a thin 2-sided adhesive tape. Before installing the motherboard, it is necessary to make a small cut in the slots of the USB printer frame and in the side cover. Install the mother on the adapter, then into the printer case. The adapter for display module print with a resolution of 0.15...0.2 mm.


0 Likes4 DownloadsJanuary 5, 2022




This model is restricted by licensing terms. 
0 Likes4 DownloadsJanuary 5, 2022
This model is restricted by licensing terms.