3D model description: A fun game for young and old, played inside or outside. Everything is screwed together except from the base, this way you can always take it apart and it's easier to store or take with you. You place the goal somewhere you like and create a start point. The person that needs the least trows wins. The chains help to get the disc in the goal. You can create a new parkour by just start from somewhere else and replace the goal. play with as many as you want, you just need to print extra discs. Have fun ;) 3D printing settings: Everything is placed like how i printed it. Some pieces will need supports, i printed the basket without supports but then the bottom of the squares are not 100% clean but as you can see it is possible to do without. For the top part you can choose one where you can place the flagpole in or if you don't like the flag you can take the one without. I printed everything with a 0.2 layer height and 0.4 nozzle. For the disc i used adaptive layers to get a cleaner print and i used support to. Join my membership plan the get permission to sell the prints.