Bambu Lab P1P ARC Assembly Organizer for 3D Sourcerer Kit

Print this with some leftover filament to keep your ARC kit organized during the build!

THIS PRINT IS COMPLETELY OPTIONAL AND IS FOR ORGANIZATIONAL PURPOSES ONLY.

IF YOU ARE LOW ON FILAMENT, PLEASE SKIP THIS PRINT.

The idea is to be able to easily arrange all of your fasteners so that you don't need to keep count of the number you've used during assembly. It is pretty satisfying to see your progress as the number of brass inserts slowly decreases as you progress through the build. Again, this is optional and just for those who might find it useful.

BASED ON THE ARC BOM (4/5/2023)

These prints are based on the Bill of Materials (BOM) provided by ThrutheFrame for the P1P ARC enclosure build. Please refer to the BOM (in the downloadable files) on the ARC listing below for more details:

https://www.printables.com/model/356301-arc-for-bambu-lab-p1p

SPECIAL NOTE

The PTFE tube fasteners are included in the Spool, Tag, PTFE.stl print, but they are not included in the BOM table. These items are optional, so feel free to skip this print if you wish. Please see the footnotes where the M3x4mm bolts are mentioned.

There are a total of 4 fasteners for the PTFE adapter:

x2 M3x4mm bolts (from your P1P spares)

x2 M3x8mm bolts (from the kit)

https://www.printables.com/model/333616-bambu-lab-p1p-ptfe-tube-bracket

Watch Video here: https://youtu.be/CHP4hpfIViU

Follow us on:

YouTube: https://www.youtube.com/@3dsourcerer
 Website: https://3dsourcerer.com/
 Facebook: https://www.facebook.com/3DSourcerer/
 TikTok: https://www.tiktok.com/@3dsourcerer
 Instagram: https://www.instagram.com/3dsourcerer
 Twitter: https://twitter.com/3DSourceNews
 LinkedIn: https://www.linkedin.com/showcase/3d-sourcerer