This print uses 13 different colours and 15 swaps.  The 3MF file has the swaps already loaded for bambu studio and also includes a strength and speed modifier for the first few layer.  Adds time to the print, so if that's an issue, just delete the modifier or use the STL file instead.
  
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.  The Model is 233x233mm in size.  The Depth is 5mm.  This print uses 13 unique filaments.

Filaments Used:
	PLA BambuLab Basic Black Transmission Distance: 0.6
	PLA BambuLab Basic Green Transmission Distance: 2
	PLA PolyTerra Charcoal Black Transmission Distance: 0.3
	PLA BambuLab Basic Blue Transmission Distance: 4
	PLA Overture Cement Gray Transmission Distance: 0.6
	PLA BambuLab Basic Brown Transmission Distance: 2
	PLA+ Sunlu Grey Transmission Distance: 2
	PLA BambuLab Basic Cyan Transmission Distance: 1.9
	PLA BambuLab Basic Orange Transmission Distance: 5
	PLA Overture Matte Light Gray Transmission Distance: 0.3
	PLA BambuLab Basic Yellow Transmission Distance: 6
	PLA+ Esun Bone White Transmission Distance: 5
	PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
	Start with Black
	At layer #15 (1.28mm) swap to Green
	At layer #16 (1.36mm) swap to Black
	At layer #19 (1.6mm) swap to Charcoal Black
	At layer #22 (1.84mm) swap to Blue
	At layer #25 (2.08mm) swap to Cement Gray
	At layer #28 (2.32mm) swap to Blue
	At layer #29 (2.4mm) swap to Brown
	At layer #35 (2.88mm) swap to Grey
	At layer #36 (2.96mm) swap to Cyan
	At layer #38 (3.12mm) swap to Orange
	At layer #43 (3.52mm) swap to Light Gray
	At layer #44 (3.6mm) swap to Yellow
	At layer #46 (3.76mm) swap to Orange
	At layer #49 (4mm) swap to Bone White
	At layer #54 (4.4mm) swap to Jade White for the rest.


Chaucer the Chimp.stl

Carved Aztec

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 233x233mm in size. You may print at higher layer heights below the Min Depth of 0.96mm. The Max Depth is 5mm and the Actual Depth is 5mm. This print uses 7 unique filaments

Filaments Used:
     PLA BambuLab Basic Black Transmission Distance: 0.6
     PLA PolyTerra Charcoal Black Transmission Distance: 0.3
     PLA+ Sunlu Grey Transmission Distance: 2
     PLA Overture Matte Light Gray Transmission Distance: 0.3
     PLA BambuLab Basic Orange Transmission Distance: 5
     PLA+ Esun Bone White Transmission Distance: 5
     PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
     Start with Black
     At layer #13 (1.12mm) swap to Charcoal Black
     At layer #18 (1.52mm) swap to Grey
     At layer #23 (1.92mm) swap to Light Gray
     At layer #28 (2.32mm) swap to Orange
     At layer #30 (2.48mm) swap to Bone White
    At layer #52 (4.24mm) swap to Jade White for the rest.

Carved Aztec

Carved Aztec.stl

Diesel Punk Rottweiler.  This artwork took some time to get right but it came out great in the end!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
     PETG JAYO Black Transmission Distance: 0.3
     PLA PolyTerra Charcoal Black Transmission Distance: 0.3
     PLA Overture Cement Gray Transmission Distance: 0.6
     PLA+ Sunlu Grey Transmission Distance: 2
     PLA Overture Light Gray Transmission Distance: 0.7
     PLA+ Esun Bone White Transmission Distance: 5
     PLA BambuLab Basic Orange Transmission Distance: 5
     PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions: 
     Start with Black
     At layer #9 (0.8mm) swap to Charcoal Black
     At layer #11 (0.96mm) swap to Cement Gray
     At layer #13 (1.12mm) swap to Grey
     At layer #14 (1.2mm) swap to Light Gray
     At layer #18 (1.52mm) swap to Bone White
     At layer #25 (2.08mm) swap to Orange
     At layer #29 (2.4mm) swap to Jade White for the rest.

Diesel Punk Rottweiler Dog - Hueforge Print

Diesel Punk Rottweiler_Front.stl

Lion King of the Jungle.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.  The Model is 233x233mm in size.  You can print at higher layer heights below the Min Depth of 0.48mm.  The Max Depth is 4.2mm and the Actual Depth is 4.3mm

Filaments Used:
	PLA BambuLab Basic Black Transmission Distance: 0.6
	PLA Overture Cement Gray Transmission Distance: 0.6
	PLA BambuLab Basic Orange Transmission Distance: 5
	PLA BambuLab Basic Brown Transmission Distance: 2
	PLA BambuLab Matte Latte Brown Transmission Distance: 2
	PLA BambuLab Basic Beige Transmission Distance: 8
	PLA+ Esun Bone White Transmission Distance: 5
	PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 8 unique filaments

Swap Instructions:
	Start with Black
	At layer #15 (1.28mm) swap to Cement Gray
	At layer #24 (2mm) swap to Orange
	At layer #27 (2.24mm) swap to Brown
	At layer #28 (2.32mm) swap to Latte Brown
	At layer #34 (2.8mm) swap to Beige
	At layer #38 (3.12mm) swap to Bone White
	At layer #42 (3.44mm) swap to Jade White for the rest.


Lion King of the Jungle - Hueforge Print

Lion King of the Jungle.stl

A black Labrador with some arty stripes added.  I think it came out pretty well and it looks really good up on the wall.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
     PETG JAYO Black Transmission Distance: 0.3
     PLA PolyTerra Charcoal Black Transmission Distance: 0.3
     PLA Overture Cement Gray Transmission Distance: 0.6
     PLA+ Sunlu Grey Transmission Distance: 2
     PLA Overture Light Gray Transmission Distance: 0.7
     PLA+ Esun Bone White Transmission Distance: 5
     PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
     Start with Black
     At layer #8 (0.72mm) swap to Charcoal Black
     At layer #15 (1.28mm) swap to Cement Gray
     At layer #21 (1.76mm) swap to Grey
     At layer #25 (2.08mm) swap to Light Gray
     At layer #33 (2.72mm) swap to Bone White
     At layer #40 (3.28mm) swap to Jade White for the rest.

Black Labrador Dog.stl

This print turned out beautifully.  There are 12 different filaments but the Red and Cement Grey have a fairly subtle effect so can be skipped if wanted.

If you're using Bambu Studio, the included 3MF file has filament swaps applied, otherwise there is an STL file available to download along with pdf filament swap instructions.

Filaments Used: 

PLA BambuLab Basic Black Transmission Distance: 0.6
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Green Transmission Distance: 2
PLA Overture Cement Gray Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA+ Sunlu Grey Transmission Distance: 2
PLA Overture Light Gray Transmission Distance: 0.7
PLA BambuLab Basic Orange Transmission Distance: 5
PLA+ Esun Bone White Transmission Distance: 5
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 5

Sunset Crown - Hueforge Print

Sunset Crown.3mf

Sunset Crown.stl

The owl is my wife's favourite creature and she tells me often that they are one of the most underestimated birds of prey.  I made this diesel punk mash up for her and she loves it.  

This piece measures 233 x 233mm with a depth of 4.24mm.  Frame not included.

Filaments Used:
	PETG JAYO Black Transmission Distance: 0.3
	PLA PolyTerra Charcoal Black Transmission Distance: 0.3
	PLA Overture Cement Gray Transmission Distance: 0.6
	PLA Overture Light Gray Transmission Distance: 0.7
	PLA BambuLab Basic Orange Transmission Distance: 5
	PLA BambuLab Basic Yellow Transmission Distance: 6
	PLA+ Esun Bone White Transmission Distance: 5
	PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
       Start with Black
       At layer #12 (1.04mm) swap to Charcoal Black
       At layer #16 (1.36mm) swap to Cement Gray
       At layer #24 (2mm) swap to Light Gray
       At layer #31 (2.56mm) swap to Orange
       At layer #35 (2.88mm) swap to Yellow
       At layer #37 (3.04mm) swap to Bone White
       At layer #38 (3.12mm) swap to Jade White for the rest.

Diesel Punk Owl - Hueforge Print

Diesel Punk Owl Sunburst2_Front.stl

This is Bully the Pitbull.  Took me ages to get the colour right, almost gave up at one point but really happy with the way this turned out in the end.

The 3MF file has the swaps already loaded and also includes a modifier for the first 11 layers which helps achieve a smooth looking and uniform black background.  Adds time, so delete it if that's an issue for you or just use the STL file instead.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.  This print is 233x233mm in size.  You may print at higher layer heights below the Min Depth of 0.96mm.  The Max Depth is 5mm and the Actual Depth is 5mm.  

Filaments Used:
     PLA BambuLab Basic Black Transmission Distance: 0.6
     PLA PolyTerra Charcoal Black Transmission Distance: 0.3
     PLA BambuLab Basic Brown Transmission Distance: 2
     PLA Overture Cement Gray Transmission Distance: 0.6
     PLA BambuLab Basic Orange Transmission Distance: 5
     PLA+ Esun Bone White Transmission Distance: 5
     PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
     Start with Black
     At layer #20 (1.68mm) swap to Charcoal Black
     At layer #23 (1.92mm) swap to Brown
     At layer #25 (2.08mm) swap to Cement Gray
     At layer #27 (2.24mm) swap to Orange
     At layer #31 (2.56mm) swap to Bone White
     At layer #35 (2.88mm) swap to Jade White for the rest.

Bully the Pitbull - Hueforge Print

Bully the Pitbull.stl

Bully the Pitbull.3mf

 I admit, this takes a few different filaments (13) but if you have the filaments and the patience the end result is well worth the journey.  This print looks fabulous on the wall.

For a more economic, sepia look, you can reduce the number of filaments to 7. 
Simply skip the green, brown, orange, red, yellow and bone white (not pictured).

This print uses 13 unique filaments
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 233x233mm in size. The Max Depth is 5mm and the Actual Depth is 5mm. 

Filaments Used:
     PLA BambuLab Basic Black Transmission Distance: 0.6
     PLA PolyTerra Charcoal Black Transmission Distance: 0.3
     PLA BambuLab Basic Green Transmission Distance: 2
     PLA Overture Cement Gray Transmission Distance: 0.6
     PLA BambuLab Basic Brown Transmission Distance: 2
     PLA BambuLab Basic Orange Transmission Distance: 5
     PLA+ Sunlu Grey Transmission Distance: 2
     PLA Overture Matte Light Gray Transmission Distance: 0.3
     PLA BambuLab Basic Red Transmission Distance: 4
     PLA BambuLab Basic Yellow Transmission Distance: 6
     PLA BambuLab Matte Latte Brown Transmission Distance: 2
     PLA+ Esun Bone White Transmission Distance: 5
     PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
     Start with Black
     At layer #16 (1.44mm) swap to Charcoal Black
     At layer #18 (1.52mm) swap to Green
     At layer #20 (1.68mm) swap to Cement Gray
     At layer #23 (1.92mm) swap to Brown
     At layer #24 (2mm) swap to Orange
     At layer #25 (2.08mm) swap to Grey
     At layer #27 (2.24mm) swap to Light Gray
     At layer #28 (2.32mm) swap to Red
     At layer #29 (2.4mm) swap to Orange
     At layer #30 (2.48mm) swap to Yellow
     At layer #32 (2.64mm) swap to Latte Brown
     At layer #39 (3.2mm) swap to Bone White
     At layer #44 (3.6mm) swap to Jade White for the rest.

Molly the Mammoth - Hueforge Print

Molly the Mammoth.stl

**What You See Is What You Print.**  

All images are photos of the actual 3D printed model.  No origination artwork is shown.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

3D MGK

Pinned models