This ferocious looking print turned out exceptionally well, really pops in the frame! The 3MF file has the swaps already loaded and also includes a strength and speed modifier which adds time to the print. If the added time is an issue you can delete the modifier or use the STL file instead. Frame not included.
Gorilla Borg Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 233x233mm in size. The Depth is 5mm. This print uses 9 unique filaments.
Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA BambuLab Basic Green Transmission Distance: 2 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Blue Transmission Distance: 4 PLA+ Esun Brown Transmission Distance: 1.5 PLA BambuLab Matte Dark Brown Transmission Distance: 2 PLA+ Esun Bone White Transmission Distance: 5 PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions: Start with Black At layer #16 (1.36mm) swap to Charcoal Black At layer #19 (1.6mm) swap to Green At layer #21 (1.76mm) swap to Red At layer #22 (1.84mm) swap to Blue At layer #23 (1.92mm) swap to Black At layer #34 (2.8mm) swap to Brown At layer #39 (3.2mm) swap to Dark Brown At layer #44 (3.6mm) swap to Bone White At layer #55 (4.48mm) swap to Jade White for the rest.