tracking pixel
3DMGK

Geraldine the Giraffe - Hueforge Print

by
3D MGK
Follow
Follow
Remix Model
3D MGK
3D MGK
|
Image 1 of 5
Geraldine the Giraffe - Hueforge Print 3d model
3D MGK
3D MGK
|
Image 1 of 5
Geraldine the Giraffe - Hueforge Print 3d model
2D
3D
Makes
Geraldine the Giraffe - Hueforge Print 3d model
Geraldine the Giraffe - Hueforge Print 3d model
Geraldine the Giraffe - Hueforge Print 3d model
Geraldine the Giraffe - Hueforge Print 3d model
Geraldine the Giraffe - Hueforge Print 3d model
This model is restricted by licensing terms. 
0 Likes0 DownloadsAugust 9, 2024
This model is restricted by licensing terms. 


This is Geraldine the Giraffe. She's a 233 x 233mm print, 5mm depth, 4mm blend. She uses 7 different colours.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 233x233mm in size

Filaments Used: PLA Overture Black Transmission Distance: 0.7 PLA BambuLab Basic Green Transmission Distance: 2 PLA BambuLab Basic Cyan Transmission Distance: 1.9 PLA+ Esun Brown Transmission Distance: 1.5 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions: Start with Black At layer #19 (1.6mm) swap to Green At layer #21 (1.76mm) swap to Cyan At layer #22 (1.84mm) swap to Black At layer #42 (3.44mm) swap to Brown At layer #43 (3.52mm) swap to Orange At layer #48 (3.92mm) swap to Yellow At layer #52 (4.24mm) swap to Jade White for the rest.

Note - Frame is not included.


0 Likes0 DownloadsAugust 9, 2024




This model is restricted by licensing terms. 
0 Likes0 DownloadsAugust 9, 2024
This model is restricted by licensing terms.