Dragon Borg
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. The Model is 233x233mm in size. The overall depth is 5mm with just over 4mm blending depth. This print uses 8 different colours.
Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA BambuLab Basic Green Transmission Distance: 2 PLA BambuLab Basic Magenta Transmission Distance: 3.4 PLA BambuLab Matte Dark Brown Transmission Distance: 2 PLA+ Esun Brown Transmission Distance: 1.5 PLA+ Esun Bone White Transmission Distance: 5 PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions: Start with Black At layer #14 (1.2mm) swap to Charcoal Black At layer #17 (1.44mm) swap to Green At layer #20 (1.68mm) swap to Magenta At layer #22 (1.84mm) swap to Black At layer #35 (2.88mm) swap to Dark Brown At layer #38 (3.12mm) swap to Brown At layer #40 (3.28mm) swap to Dark Brown At layer #45 (3.68mm) swap to Bone White At layer #55 (4.48mm) swap to Jade White for the rest.