This print uses 13 different colours and 15 swaps. The 3MF file has the swaps already loaded for bambu studio and also includes a strength and speed modifier for the first few layer. Adds time to the print, so if that's an issue, just delete the modifier or use the STL file instead.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. The Model is 233x233mm in size. The Depth is 5mm. This print uses 13 unique filaments.

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Green Transmission Distance: 2 PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Transmission Distance: 4 PLA Overture Cement Gray Transmission Distance: 0.6 PLA BambuLab Basic Brown Transmission Distance: 2 PLA+ Sunlu Grey Transmission Distance: 2 PLA BambuLab Basic Cyan Transmission Distance: 1.9 PLA BambuLab Basic Orange Transmission Distance: 5 PLA Overture Matte Light Gray Transmission Distance: 0.3 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA+ Esun Bone White Transmission Distance: 5 PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions: Start with Black At layer #15 (1.28mm) swap to Green At layer #16 (1.36mm) swap to Black At layer #19 (1.6mm) swap to Charcoal Black At layer #22 (1.84mm) swap to Blue At layer #25 (2.08mm) swap to Cement Gray At layer #28 (2.32mm) swap to Blue At layer #29 (2.4mm) swap to Brown At layer #35 (2.88mm) swap to Grey At layer #36 (2.96mm) swap to Cyan At layer #38 (3.12mm) swap to Orange At layer #43 (3.52mm) swap to Light Gray At layer #44 (3.6mm) swap to Yellow At layer #46 (3.76mm) swap to Orange At layer #49 (4mm) swap to Bone White At layer #54 (4.4mm) swap to Jade White for the rest.

Frame not included.