Every Arch-Lich needs more than just a guardian. They need spies. They need an infestation.

This is the Lichling, the "Mini Monster" of the crypt.

While its massive 'Alpha Guardian' counterpart, The Lich's Spine, patrols the dark vaults, these smaller, twisted terrors are spawned from the bone fragments and dark magic it sheds.

They are not majestic guardians. They are the Lich's hyper-aggressive familiars, his scuttling scouts, and his favored pests. They swarm through shadows, climb fortress walls, and overwhelm any heroes foolish enough to mistake their small size for weakness. A single Lichling is a nuisance. A swarm is a nightmare.

The Lichling is designed as a faster, "monster-fied" print, allowing you to quickly amass an undead army to overrun your shelves.

But remember... every swarm needs its master.

🔥 Looking for the "Alpha Guardian"? If you want the massive and terrifying "Alpha Guardian" this creature serves, quickly go back through the portal and grab The Lich's Spine here! https://thangs.com/designer/PrintStart3D/3d-model/The%20Lich%27s%20Spine-1454743

This is a 100% print-in-place model. For best results: Supports: None Layer Height: 0.08mm or 0.12 or 0.16mm Infill: 10% is perfect. Adhesion: A brim is recommended to ensure the vertebrae stay locked to the build plate during the first few layers. Post-Print: Once cooled, gently flex the entire 3D printer build plate to unlock its full articulation.

If you love this design, please post a Make and give it a Like!

Find all my social media links on my official Printstart3d page: https://beacons.ai/printstart3d

My Go-To 3D Printer (Bambu Lab): https://tidd.ly/4nv3Hwg I used Amolen PLA and Bambu PLA See All the Materials I used here: https://beacons.ai/printstart3d