BMW - X1 F48 2016 Wall Art

bmw x1 f48 2016.stl

BMW - X1 E84 2013 Wall Art

bmw x1 e84 2013.stl

Poop Tower Game (purge escape - jenga style)

Tower Extension 1.stl

AMS Internal Hub Unit Bushing

sacrificialBushing.3mf

BambuLab X1 Series and P1S Exhaust Capture System (with LED support) ECS3

X1 Series and P1S ECS V3 1v00a frame back right manifold.stl

Psyduck - 3MF Color - Bambu - Pokemon - Fan Art

3D Printable Articulated Otter

Otter.stl

Bambu Lab Y-Splitter (5x5 magnets)

**Description**

This model allows all Bambu Lab X1/X1-Carbon users to use both the AMS and the external spool without having to disconnect/reconnect the PTFE tubes every time you want to switch. When designing this model I wanted to accomplish the below 3 goals:

- **Follow the filament's natural path for both AMS and external spool.** The filament path in all available Y-Splitter designs is optimal only for the AMS. For the external spool, however, the splitter usually turns in an up direction, which can cause the filament to get snag when inserting it.

- **Relieve the strain on the toolhead PTFE Tube.** This was achieved by adding a support section accommodating 3 neodymium magnets (5mm x 5mm). The Y-Splitter snaps nicely in place on the back cover of the printer.

- **Remove the stock coupling. ** I wanted to reduce the weight and length of the whole setup. Since this model has pneumatic connectors on all 3 entries, the stock one isn't really required.

I have been using this Y-Splitter for over a week and can confirm it works beautifully. The AMS colour changes work effortlessly, and I am able to start a print with the external spool in a matter of seconds.

**Print Settings**
- Material: PETG (optimal) - PLA (best)
- Layer height: 0.08mm (optimal) - 0.12mm (best)
- Walls: 4 (highly recommended)
- Infill: 25%
- Infill pattern: Grid
- Enable Support: YES
- Support Type: Tree (auto)
- Support Top Z distance: 0.45mm (this setting is to allow easy removal of the support)
- Support/object XY distance: 0.5mm (this setting is to allow easy removal of the support)
- Brim Type: Auto (highly recommended)

**Bill of Materials**
- 3 x PC4-M10 pneumatic connector 
- 3 x neodymium magnets 5mm x 5mm

**Important**
You need to adjust the toolhead PTFE tube to gain an additional 22mm so it sits flush inside the Y-Splitter. Alternatively, you can purchase a longer PTFE tube. If you decide to purchase a new one, ensure the ID is 2.5mm and the OD is 4mm.

I have moved the pneumatic stopper on the toolhead PTFE tube (the one sitting on the inside of the printer, next to the rubber sleeve where the PTFE tube exits the rear) and I can confirm that everything works perfectly fine. This option worked for me but may not for you so go print at your own risk. If you decide to go for this option, make sure the toolhead can reach the opposite corner and that the PTFE tube follows a natural path without any restrictions. 

**Disclaimer**
Avoid using any Carbon Fiber polymers (or any other abrasive options) to print this Y-Splitter since the roughness of the surface may cause the filament to get stuck on the inside path of the actual model.

Bambu Lab Y-Splitter (5x5 magnets) v2.1

Bambu Lab Tool Holder for X1 Carbon and AMS

	This was designed to go on top of the Bambu Lab X1 Carbon in front of the AMS. I made it to hold all of the tools that the X1 Carbon Combo comes with out of the box plus a place for the pre-sliced scraper with the metal blade and a tray for other tools or parts you might want it to hold.

Knight Duck

knight_duck.stl

SpinCycle : Keep every spool dry, For Bambu X1 /P1P AMS and Print-from dryboxes  #ThangsBambuContest

SpinCycle_DefaultJar.stl

BAMBULAB X1 & X1C + COMBO FILAMENT POOP OR PURGE SLIDE

POOP WHALE.stl

BAMBU LABS AMS PTFE TUBE AND CABLE RELEASE TOOL

Gridfinity Bin for Bambu X1 Hotend Assemblies

bambu-nozzle-gridfinity-block v2.step

PRICKLY PEAR KEYCHAIN 002 - Cactus 

01.  PRICKLY PEAR KEYCHAIN 002 - WITH RING.stl

Bambu Lab P1P garbage chute

Dazzling Bigery-Wluff.stl

Hydrometer and Desiccant Stand for Bambu Lab X1, AMS, Tool Storage

hydrometer and desiccant stand

NI Traktor Kontrol X1 / X1 MK2 / F1 / Z1 Stand / Cover/ Case

NI Kontrol X1 Stand OnePiece.stl

Headphone Wall Mount (No screws required)

Mount.stl

3D Printable Bambu Labs Large Toolbox Organizer

3D Printable Toolbox.3mf

x1

Trending this Week

Categories

Trending

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

BMW - X1 F48 2016 Wall Art

BMW - X1 E84 2013 Wall Art

Poop Tower Game (purge escape - jenga style)

AMS Internal Hub Unit Bushing

BambuLab X1 Series and P1S Exhaust Capture System (with LED support) ECS3

Psyduck - 3MF Color - Bambu - Pokemon - Fan Art

3D Printable Articulated Otter

Bambu Lab Y-Splitter (5x5 magnets)

Bambu Lab Tool Holder for X1 Carbon and AMS

Knight Duck

SpinCycle : Keep every spool dry, For Bambu X1 /P1P AMS and Print-from dryboxes #ThangsBambuContest

BAMBULAB X1 & X1C + COMBO FILAMENT POOP OR PURGE SLIDE

BAMBU LABS AMS PTFE TUBE AND CABLE RELEASE TOOL

Gridfinity Bin for Bambu X1 Hotend Assemblies

PRICKLY PEAR KEYCHAIN 002 - Cactus

Bambu Lab P1P garbage chute

Hydrometer and Desiccant Stand for Bambu Lab X1, AMS, Tool Storage

NI Traktor Kontrol X1 / X1 MK2 / F1 / Z1 Stand / Cover/ Case

Headphone Wall Mount (No screws required)

3D Printable Bambu Labs Large Toolbox Organizer