Snappy Cat  - Prepainted 3MF for Bambu Users (Snap-Flex: All Tolerances)

**Print-In-Place, No Supports, Articulating Fidget Toy**

**Pre-Painted 3MF of all Snap-Flex joint tolerances**

Looks like the cat's out of the bag.  When you're feeling frisky or need a quick paws from the hassles of everyday life, reach for your purr-fect pocket pal.  

Snappy Cat is the fourth creation in a series of Snap-Flex models by Mimetics 3D, and is available for free for a limited time.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true)

**Snap-Flex Collection:**
This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows Snappy Cat to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. 

Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

**Snap-Flex Instructions:**
To Lock: Push Body Segments together
To Unlock: Pull Body Segments Apart


**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for Snappy Cat to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

Please try out each to see what works best for you, and let me know which version you prefer!

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.


**Other Models:**

If you like Snappy Cat, be sure to check out the latest spooky articulated model here:
**Tight Tolerance Franken-Spine:**
https://than.gs/m/956746
**Medium Tolerance Franken-Spine:**
https://than.gs/m/956751
**Loose Tolerance Franken-Spine:**
https://than.gs/m/956752


Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
Brim Suggested
**No Supports, Print-In-Place at 100% scale** 
Printing any smaller may disable the Snap-Flex joint.

Printing larger than 100% will make the snap louder AND **harder to pop**, so be sure to do a shorter test print to make sure it's not **TOO hard to snap into place.**

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Bee Bear Pixie

Bee_bear_pixie_Keychain.stl

ULTIMATE BRAIN LEVELS

New_mega_brain_levels.3mf

2x2 MU - Top Grid Interfitted - MultiBoard Octagon Plate - 4x Multi-Material Stack

2x2 MU Top Edge - Multiboard Border Tile - x4 Multi-Material Stack.stl

Desk Tray Type 2

Desk Tray Type 2 Style 1_STL.stl

Desk Organiser Type 12

Desk Organiser Type 12 Base.STEP

M3D - Fantastic Treasure Chest

M3D-FantasticTreasureBox-Doubloon.stl

M3D - Flexi Lobster R2

M3D-Lobster-R2.stl

The Witcher Sword

witcher_steel_sword_SubTool1.stl

Iron Man MK46-47

SH_Figuarts_Iron_Man_Mark_46_Waist.stl

Derpy Pikachu - Pokemon

Derpy Pikachu.stl

Not Soo XL Snowman

XL Snowman a1.3mf

Bullet Bill Fidget Clicker - Keychain - Parted Out

BULLET_AMS.stl

Flexi Stag Beetle

FlexiStagBeetle_05_Keychain.stl

Koala Keychain Dual Joint

BOBkoalaKeychainDualJoint.stl

Blob Fox - Articulating Flexi Fidget Art Toy

Blob Lab Fox 8 All.STL

Staryu (Easy Print No Supports)

Staryu.3mf

Halloween Charmander (Easy Print No Supports)

HalloweenCharmander2024_01.stl

SNACCO Snack Bowl - Pistachio Bowl

SNACCO - Flowalistik Studio.3mf

REWIND | MAGNETIC VIDEOTAPE BAG SEALER

REWIND - LID.STL

x

Most Popular Paid of All Time

Categories

Paid

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Snappy Cat - Prepainted 3MF for Bambu Users (Snap-Flex: All Tolerances)

Bee Bear Pixie

ULTIMATE BRAIN LEVELS

2x2 MU - Top Grid Interfitted - MultiBoard Octagon Plate - 4x Multi-Material Stack

Desk Tray Type 2

Desk Organiser Type 12

M3D - Fantastic Treasure Chest

M3D - Flexi Lobster R2

The Witcher Sword

Iron Man MK46-47

Derpy Pikachu - Pokemon

Not Soo XL Snowman

Bullet Bill Fidget Clicker - Keychain - Parted Out

Flexi Stag Beetle

Koala Keychain Dual Joint

Blob Fox - Articulating Flexi Fidget Art Toy

Staryu (Easy Print No Supports)

Halloween Charmander (Easy Print No Supports)

SNACCO Snack Bowl - Pistachio Bowl

REWIND | MAGNETIC VIDEOTAPE BAG SEALER