**Introducing a spooky season favorite... the Tarantula!!** (...with apologies to anyone who's afraid of spiders)

The legs are super-posable using snap-fit assembly. The spinnerets on it's abdomen even form a loop you can use to hang it from some string. Great for a spooky decoration!

Please check out this video for a detailed breakdown of the assembly and features... [Demonstration Video\
](https://youtu.be/aZ6h31XeVPo)

With 3d printing tolerances being somewhat unpredictable, I added some methods to help fine-tune the leg joint tolerances if needed (either by clipping a specific spot on the model or using the joint test objects to dial-in the leg scale).  For help with that, **PLEASE READ THE INSTRUCTIONS GUIDE INCLUDED IN THE DOWNLOAD, or [watch This Video](https://youtu.be/-F45C86IXoo).**

ATTENTION:
All MatMire Makes Designs are protected under Copyright Law.
Your purchase gives you the right to download and print the design for your personal use. You do NOT have permission to resell or redistribute those digital files in ANY way. This includes altered or "remixed" versions of the designs. Prints of the design cannot be sold without authorization.

To sell PRINTS of my designs, you must obtain authorization by joining the "Merchant" Tier of either my [Patreon](https://www.patreon.com/matmire_makes) or [MMF Tribe](https://www.myminifactory.com/users/MatMireMakes?show=tribe#/).

If you like this design, please checkout my Socials and give a follow. More designs are coming soon!

Please, share photos of your makes! I would love to see them!

Visit my [Amazon Storefront](https://www.amazon.com/shop/matmire_makes) for links to the Filaments & Equipment I used.

Attention:
Not suitable for unsupervised play by small children or pets, as small parts can pose a choking hazard if broken off due to rough play. Not recommended for children under 3.

Printing Details

-   **PLEASE READ THE INSTRUCTIONS GUIDE INCLUDED IN THE DOWNLOAD**
-   **Body**: No supports needed.
-   **Abdomen**: No supports needed, remove custom brim after printing and snap-fit to Body
-   **Legs**: all limbs in one stl for easy placement and scaling, snap-fit to Body, No supports needed.
-   **Legs (individual files)**: all limbs separated into individual STLs, in case you want to reprint specific ones, or arrange them differently on the print bed.
-   **Test Ball & Test Socket files**: If your print has too tight or too loose fitting legs, watch** [This Video](https://youtu.be/-F45C86IXoo) **to help dial in the joint tolerances.
-   **Multicolor 3MF**: (Compatible with PrusaSlicer and Bambu Studio)
-   **10%-15% Infill** (I recommend Gyroid, Crosshatch or 3D Honeycomb)
-   3 Walls.\
If you use brims to aid in bed adhesion, I recommend setting the brim gap to around 0.3-0.35mm. This will still help adhesion, yet will also make the brim much easier to remove. 

This should generally scale down to about 65% with full articulation, on a well calibrated printer.  Your mileage may vary.\
Please check out this video for a detailed breakdown of the assembly and features... [Demonstration Video\
](https://youtu.be/aZ6h31XeVPo)

**This model was designed for FDM printing. It was not designed for Resin printing, and I cannot guarantee good/functional results. Resin print at your own risk.*

Attention: Not suitable for unsupervised play by small children or pets, as small parts can pose a choking hazard if broken off due to rough play. Not recommended for children under 3.

wolfspider

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Tarantula - Articulated Figure