Bobbin Thread/Wire Winder

bobbin_winder_kwerkshop.stl

HSW Wire Stripper Holder

HSWWireStripperHolder.3mf

Wire Nut Pencil Cup with storage in the bottom 

WIRE NUT PENCIL CUP 8 INCH WITH STORAGE.stl

XL Winged Wire Nut Container - 280mm Container

XL WINGED NUT - 280MM .stl

Lattice Skull Wire Tangle

This model is part of a series of Lattice Skulls designed for resin printing. Each model features a different complex lattice structure.

See here for videos:

Square and Diamond: https://youtu.be/2ApAvu3hb6U
Wire Weave and Tangle: https://youtu.be/bzIrmCZ9WpE 

Download 3D files:
Square: https://than.gs/m/948742 
Diamond: https://than.gs/m/948745 
Wire Weave: https://than.gs/m/948893 
Wire Tangle:

These models require an intermediate to advanced experience level to set up and print. 

The models with very thin structures use very little material to print but are delicate and require extra care when printing and processing.

To print, rotate the model 180 degrees upside down so that the top of the skull is oriented to the build plate. The skull is tilted slightly forward to reduce the need for internal supports. If you maintain the forward tilt of the skull you will only need to generate support to the top of the head. The rest of the model will print without the need for supports inside of the skull.


Soldering wire stand (Print in place)

Really proud of this one. Soldering wire stand with print in place hinge and metal shaft slid into a hole. supports most sizes of soldering wire spools, many spools can be installed at once. If you want to access the spools, just lift the metal shaft up. If a small wire spool is installed, there is always more room for insulation tape, scotch tape etc
it works incredibly smoothly and is very strong. the bottom of the stand is corrugated so it grips nicely to a rough desk but there are also round holes for rubber pads.
The middle section has all the main lead exposure health hazards noted down for when you'll inevitably forget about them from all the lead fumes you have been inhaling. The sides have tin and lead elements decals.

_The model is supposed to be printed laying down with the hinge's shaft touching the build plate. The orientation here is very important so that the hinge works properly. I printed mine with .6mm nozzle at .14mm layer height and 10% infill. it's very strong and the letters & decals and perfectly readable. No brim and only one support for the shaft slot on the left side.
After printing, a ~10cm long, 10mm wide shaft is supposed to be pushed into the hole above the hinge. If you dont have a metal shaft, you can always 3d print one though it wont look as neat._

Wireframe Ambiguous Cube // POV Illusion

largeWire_noStand.stl

4mm Cable Clip // Peg Anything

This little pegboard clip was made to hold onto the carging cables for my HTC vive controllers, but they can clip lots of things!

Made for standard pegboards with 1/4" holes spaced 1" apart

Hexagon Lid (6-pointed) for Desk Grommet System

Desk Grommet System | Base Screw & Nut: https://than.gs/m/924318

Hyperdodecahedron // Folding Polyhedra Pack No.1

This 4 dimensional dodecahedron prints flat and then folds and snaps into place! That means you can get cool multicolor parts on all faces with simple color swaps as well as crazy geometry without support material!

This is a freebie from my [Folding Polyhedra Pack No.1](https://www.myminifactory.com/object/3d-print-folding-polyhedra-pack-no-1-81865)

folding-polyhedra-pack-04-dodecahedron-dodecahedron-hyperplus.stl

WireChannel Turn (WIP)

Imagine an easy way to keep your wires to the body plate of your FRC robot. Well, here you go? Still work in progress and working out a few problems. Feel free to put feedback in the comments so I can troubleshoot.

Camel Hook (Medium)

Stick Steeple

A simple stick structure I sculpted in VR (Blocks by Google). Use this neat model to test your printers ability to print thin vertical rods and points, and bridge small gaps. Scale as desired.

#088 Grimer Pokemon Wiremon Figure

Looking for a unique and eye-catching decoration for your room or office? Look no further than this Grimer Pokemon Wiremon Figure! This digital template is designed to bring out the unique features of Grimer with its intricate wire design. Once printed with a resin 3D printer, this figure will be a conversation starter and a great addition to any Pokemon collection. The wire design is durable and sturdy, ensuring your figure will last for years to come. So why settle for boring decor when you can have this one-of-a-kind Grimer figure? Get your digital template today and start printing your own Grimer Pokemon Wiremon Figure!

Barbed Wire Tray

Don’t use this Barbed Wire Tray for your soft tomatoes. What would you use it for? 

See here for video: https://youtu.be/UzTFWuPuvNo 

This designs is intended for resin printing, but if you size it up and support it well it can be printed with an FDM printer.

This design is sponsored by Resins3D. Models shown are printed on an Elegoo Saturn 2 with Elegoo Space Grey resin.

See here for similar Barbed Wires Vases:
Video: https://youtu.be/jvREZDEv6IQ
Small: https://than.gs/m/905002 
Medium: https://than.gs/m/905006 
Large: https://than.gs/m/905027 

AI generated description:

"This is a highly detailed 3D model of a Barbed Wire Tray. Its unique design adds an edge to your typical tray design, making it perfect for thematic events, games, or even unique home décor. The tray is rectangular in shape and is adorned with replicated barbed wire details that surround the edges, which adds a visually captivating aesthetic.  It's a unique piece that can be used in multiple ways across various platforms such as animation, graphic design, gaming, and printing. Recreate a rustic, grunge-era aesthetic with this model. Please note that this is a digital file, which can be easily downloaded and used in your 3D projects."


Big Thread Spool

Gracewindale-Big-Thread-Spool-part2.stl

Antenna Mount for Vex V.5 Receiver

The antenna holder for the V.5 receiver kept breaking the wire, so I designed one so that the antenna doesn't have to bend sharply.

Compact Cord Manager

This is a screw top round box that scales very well.

The boxes in the picture are printed at 100%, 60% and 40%.

Prints without supports

wire

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Bobbin Thread/Wire Winder

HSW Wire Stripper Holder

Wire Nut Pencil Cup with storage in the bottom

XL Winged Wire Nut Container - 280mm Container

Lattice Skull Wire Tangle

Soldering wire stand (Print in place)

View 78 new models

View 21 new models

View 12 new models

View 20 new models

WireChannel Turn (WIP)

View 16 new models

View 66 new models

View 104 new models

Barbed Wire Tray

View 143 new models

Antenna Mount for Vex V.5 Receiver

Compact Cord Manager

View 15 new models

HAM Radio Wire Coil Body