This is a fully functioning 3D printed grandfather clock.  Using mainly 3D printed parts, this clock was specifically engineered to be assembled in minutes, and can run for over 6 days on a single winding. With a little bit of tuning, it can accurate keep time with that classic tick-tock sound.

The video below shows how easily this clock can be assembled 

**The STL File:**

Prints on all standard 3d printers without supports, requires the following additional parts to assemble:

- 21 M4x12| 11 M4x20 Screws (https://amzn.to/3zgQb8f)
- 23 M4 Washers (https://amzn.to/3E1crFU)
- 17 624Z 13mm OD/4mm ID Bearings (Like these https://amzn.to/3DtUUpH)
- 1mm Nylon String or Fishing Line (I used string from this set https://amzn.to/3DtUUpH)
- 5 pounds of weight - could be ball bearings or a dumbbell (I used one from this set https://amzn.to/3zfVKUy)

**Recommended print settings:**

Layer Height: 0.2mm
Nozzle: 0.4mm
Infill: 15-20% 
Material Required: ~650g (Printed in PLA)
Minimum Build Plate Required: 180x180mm


**All the files have been pre-oriented to save you some set up time! All you need to do is drop the parts into your slicer and hit print!

The 3D Printed Wall Clock

0 Entire Part Layout (For Planning).stl

Add a stylish twist to your interior with this eye-catching Modern Hex Wall Clock – a unique fusion of minimalist design and bold geometric detail. This downloadable 3D print file includes all the parts you need to print and assemble a functional and visually striking timepiece. (clock mechanism not included)
Build Video:https://youtu.be/1FBJorYDv8U

Design Features:
- Half-solid, half-honeycomb face:One side boasts a clean surface, while the other showcases a striking hexagonal lattice that gives the clock a bold, modern flair.

- Bold numbers (3, 6, 9, 12):*Elegantly styled and raised for a 3D effect, these numerals provide clear readability while adding to the clock’s decorative appeal.


Print & Assembly Info:
- Includes two variations to accommodate different clock mechanisms:
  - For 22 mm clock shaft
  - For 13 mm clock shaft
- Designed to be printed in multiple parts for easy color changes.
- Standard quartz clock mechanism compatible.
- Recommended materials: PLA or PETG.
- No supports required for most parts.

Dimensions:
Diameter: ~25 cm (10 inches)

Customization Tips:
Personalise the color scheme to match your décor or branding. 

Perfect for makers looking to add a functional centerpiece to their home, office, or workshop walls. Download, print, and turn time into a statement – with both 13 mm and 22 mm shaft options included for your convenience.

Where I bought my clock mechanism:
https://www.amazon.co.uk/dp/B08Q45GW2Z?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1


wall clock

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

The 3D Printed Wall Clock

The Clock