Oculus Quest V2 battery holder

OC2 battery holder V2.1.stl

VR battery holder [!UPDATED!]

Have vive pro and the battery connector slowly died out on me so after  eventually getting another battery (VRULC t2055) that was 20,000mah (bit bigger than the original) i Was set out on a journey to somewhat recreate the vive battery waist holder thingy so this is basically that but for a bigger battery. use 2x 2.5m screws and nuts to hold plastic retainters in to hold the battery in. pause the print at layer 596 (easiest to do in slicer software) [test it at the 2nd layer hieght just in case]   AFTER YOU HAVE CORRECTLY PAUSED IT... insert hex nuts in the holes at the side. i used a soldering iron at its lowest setting (210C) to snugly ensure the went in smooth and straight and tight. unpause printer and allow it to print over top. add the bolts later. the back clip is somewhat fragile (hasnt broke yet after a few drops [PLA] )and make sure it is properly supported when printing. if not it will move forward and back and its not gud at all.

:)

VR battery holder.stl

VR sensor mount.stl

This is a remake of a mount for Vive sensors 

Printed in: PETG
Infill: 20-40%
Supports: none

vc sensor mount.stl

Oculus Quest 2 Controller Hanger

This is a model for a small wall-mounted hanger for a single quest 2 controller. It is symmetrical, and can also be printed without support if you rotate it a bit, I'm sure you can get it going. I printed this with PETG @235/80 5mm brim, 0.8mm nozzle, 60mm/sec on my ender 3 pro with a volcano hotend.

Oculus Quest 2 Ram Air Cooler

Anker PowerCore 10000 Clip for Elite Strap

Clip this onto the back of your Meta Quest 2 elite strap to hold this specific battery, dont know if it works with anything else as I havent tried,

vr

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Oculus Quest V2 battery holder

VR battery holder [!UPDATED!]

VR sensor mount.stl

Oculus Quest 2 Controller Hanger

Oculus Quest 2 Ram Air Cooler

Anker PowerCore 10000 Clip for Elite Strap