***UPDATED:  Multicolor 3MF files now included!***
Includes a 4 Color version for most AMS printing, as well as a5 Color version(which more closely matches my hand painted example) for those with multiple AMS units or a 5 tool head printer.

**I'm really excited to share my Articulated Bat!** It makes a really fun fidget toy on its own, but... add a #12 rubber band to each wing and it become really dynamic! (Size #12 rubber bands have been tested from 70%-100% print scale. Outside of that range, different sized bands may be required)

This model is Pre-Supported *(no added supports required).*

For a walkthrough of the model, including how to add the rubber bands, watch this video
For additional info on attaching the head, [watch this video](youtu.be/dbuXpUTG3Dc)
Please, share photos of your makes! I would love to see them!

**PLEASE READ:**
All MatMire_Makes Designs are protected under Copyright Law.
Your purchase gives you the right to download and print the design for your personal use.  You do NOT have permission to resell or redistribute those digital files in ANY way.  This includes altered or "remixed" versions of the designs.  Prints of the design cannot be sold without authorization.

To sell PRINTS of my designs, you must obtain authorization by joining the "Merchant" Tier of either my Patreon or MMF Tribe.

If you like this design, please checkout my Socials and give a follow. More designs are coming soon!
Warning: Not suitable for unsupervised play by small children or pets, as small parts can pose a choking hazard if broken off due to rough play. Furthermore, broken 3D printed parts can create sharp edges and/or points. Not recommended for children under 3.

*This model was designed for FDM printing. It was not designed for Resin printing, and I cannot guarantee good/functional results. Resin print at your own risk.

**Printing Details**
- *Body with Custom Brim:* Print-in-Place, Brim geo is built in so no need to generate one.
- *Head with Custom Support:* A small pedestal support is built into the model.  Snap it off when complete.  ***No Additional Supports Needed***
- *Multicolor 3MFs now included:*
- *4 Color:* for most AMS printing
- *5 Color:* for those with multiple AMS units or a 5 tool head printer (like the Prusa XL).
- 10-15% Infill.
- 3 Walls.

*Good bed adhesion is a must for successful printing. If the custom brim shapes aren't showing up in your slice, try lowering your Initial/First Layer Height.

Scale to your liking!  100% creates a model with a roughly 10" wingspan, so that will make it easy to scale it to your desired size. (80% = 8",  75% = 7.5", etc.)  Depending on your printer tolerances, you should be able to print close to 60% before the joint function may start to become compromised. Your mileage may vary

***This model was designed for FDM printing.  It was not designed for Resin printing, and I cannot guarantee good/functional results.  Resin print at your own risk.**

Attention: Not suitable for unsupervised play by small children or pets, as small parts can pose a choking hazard if broken off due to rough play. Not recommended for children under 3.

vampirebat

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Bat- Articulated Figure