**💖 Better Together – Magnetic Keychain Pack 💖**

**Better Together** is our Valentine’s 2026 project, featuring 3 adorable mix & match designs: Panda 🐼, Bear 🐻, and Cat 🐱. 

**~🧲 Magnets (optional but recommended)**
- Magnets are optional… but highly recommended for the full _wow_ effect 💖
- Inside the 3MF files you’ll find pre-made magnet slots (we used round D8×2 mm magnets).
- Pause for magnet insertion: layer 27 when printing at 0.16 mm layer height (**already set in the 3MFs**) or 4.36 mm absolute height
- **Using a different magnet size**? No problem! Resize the slots directly in your slicer (we recommend +0.5 mm tolerance compared to the magnet size). Check the [How To Change Magnet Size](https://www.youtube.com/watch?v=EHsJunQBDBw)  Youtube Guide.

**~🔑 Keychain (optional)**
- Available with or without the keychain hole
- We used **2.4 mm ringball keychains**, easy to find and very common
- Also compatible with standard classic keyrings (≈8 mm diameter)

**~🎨 Colors & multi-color printing**
- All models are ready for up to 4-color printers
- Bear version tip 🐻❤️👁️: swap the heart filament (red) with the eye filament (white) halfway through the print and you will get a **5-color design with a 4-color printer**!

**General recommendations ⚠️**
- Before diving into the multi-color print, we highly recommend starting with a single-color **test print** to ensure everything works as expected.
- For multi-color prints, we suggest **filling the bed** to minimize PLA waste from color changes.

**Files available 📂**
- Optimized **3MF** files for BambuLab, Creality, Anycubic and Elegoo for an effortless print experience!
- **STL** files for all printers

_We believe in true love, especially when it's 3d printed_❤️✨

**Commercial License 💰**
Do you want to sell prints of our models? You can purchase commercial licensing by [joining the Commercial License in our Patreon](https://www.patreon.com/ValeriaMomo), [Thangs3D](https://thangs.com/designer/Valeria%20Momo%20%26%20Mattia) or [MyMiniFactory](https://www.myminifactory.com/users/ValeriaMomo-Mattia3D#/) and unlock the opportunity to share this design with your customers!

Cheers,
**Valeria & Mattia**

Better Together – Magnetic Keychain Pack

Couple keychain 2026_ANYCUBIC.3mf

Discover an incredibly accurate 3D model of Jack'O'Valentine, a popular character from Guilty Gear, exquisitely recreated as fan art on Thangs.com. This detailed model captures the essence of this iconic pop culture figure, showcasing everything from the character's unique hairstyle to her signature weapon, the ball and chain. As a part of the 'Pop Culture/All' category on Thangs, this 3D model of Jack'O'Valentine is perfect for fans of Guilty Gear or collectors of intricate 3D models. The artful attention to detail, as seen in the model's arms, legs, body, face, hair, halo, and even the ball and chain, makes it a must-have piece for every enthusiast. Explore the range of impressive visuals available for reference, showcasing the model in various angles and dimensions. Crafted by designer 'printedobsession', this 3D model of Jack'O'Valentine blends the perfect amount of pop culture appeal and 3D artistry.

Jack'O'Valentine - Guity Gear - Fan art

Jack O Valentine - Halo.stl

🐉 A unique articulated dragon with an advanced spherical joint system.

Unlike standard articulated dragons based on simple chain links, this model features a spherical articulation that allows smoother, more dynamic, and more natural movements.

The result is a flexible dragon that can twist, wrap, and pose in ways that traditional designs simply cannot achieve.

💡 UNIQUE spherical articulation system

🌀 smoother and more dynamic movement

🐍 hybrid dragon-snake flexibility

🎁 perfect as gift, fidget, or display piece

⚙️ PRINTING INFO

• Optimized for FDM printing

• Multi-part model

• Recommended material: PLA / PLA+

• Layer height: 0.2 mm

• Infill: 10–15%

📦 WHAT YOU GET

• STL and 3MF files

• Multi-color and single-color versions

• Pre-optimized files for easy printing

⚠️ PERSONAL USE ONLY

💡 TIP

Print in silk or dual-color filament to enhance the heart shapes and articulation.

3D printing settings
Due to the different pieces that it consist of, for monocolor printers, and due that it will be too long to describe here, and from here go to set on yours slicer softwares, for all the printing parameters, even the most minute ones,
bridging functions,
perimeters,
contours, etc,
I have been meticulously prepared all the 3MF files together with same number of stl files included in the downloadable package.

Articulated Heart Dragon – Flexible Spherical Joint Dragon

Heart DragonSnakeART.stl

The Lover’s Valentines Game, a tabletop game made for 2 to 8 players. 

Just in time for Valentine’s Day - my most novel creation and possibly my greatest contribution to mankind… a way to get into all kinds of trouble and have a lot of fun.

To start: Each player has a Box Deck and a Heart Box. The player writes secret notes with instructions and puts inside of the heart box. What kind of notes? That’s up to you!
“Kiss me”
“Stand on one foot and bark like a dog”
“Sing a song”
“Imitate Christopher Walken” – ‘Hey, you’re talking to my guy all wrong. It’s the wrong tone’
“Tell us your greatest fear”

The heart boxes are then mixed up so that no one knows who has what. Each player has a base which the heart box sits in. Spin the arrow and when it stops, the player it is pointing at must open the box and follow the instructions in the heart box. 
Who goes first? It’s up to you to determine that. You can choose by age, last person to arrive etc. make it your own. 

Each player must make an equal number of secret notes before the game starts, and each time a box is opened it is replaced with another secret note. Keep the notes in a hat, bag etc. where no one can see what is on the note.  Make as many notes as you like for longer or shorter games. A DXF template file is included if you want to print heart-shaped notes to cut out, or you can use any piece of paper small enough to fit in the box. Play until all of the notes are gone. 

You can pass if you perform a task agreed upon by the other players. Example – If you don’t want to do what is on the note, then the group agrees you must quack like a duck etc.

For a 2-player game, this is a cheeky way to propose.

Variations:

Strip Poker (ish) – roll the dice, spin the arrow. The player that the arrow stops at must remove a number of articles of clothing based on the number you rolled. If you roll a 3, the player must remove 3 articles of clothing. It can get sticky fast. The game is over when someone is au naturale. 

For a fun variation guaranteed to have everyone dying with laughter - A player panel with a + - is included, give one to each player with the + - facing the player. At the beginning of the game each player must remove one article of clothing to start. Spin the arrow and the game begins with the person it stops at. If the arrow stops closer to the + sign, the player must put on the number of articles of clothing indicated on the dice. Example, someone rolls a 2 and the arrow stops at you on the + side, you must put on 2 articles of clothing, so you could end up wearing someone else’s hat, shirt, bra, socks… If there aren’t enough spare pieces of clothing – say you roll a 3 and there are only 2 items available, you put on what is available. You get a pass if no clothing is available.

If the arrow stops closer to the – side, you must remove articles of clothing based on the number on the dice. The game is over when someone is totally bare or someone throws in the towel. This is a great winter time game when it’s cold and miserable outside and everyone is wearing a lot of clothing to keep warm. Not for long, though 😊

Drinking Game 
The + - panel has a little socket, which by some divine magical intervention is the perfect diameter for a standard shot glass. Roll the dice, spin the arrow, the player the arrow stops at must take the number of shots indicated on the dice. Now you see why the dice only goes up to three…

For a more challenging variation, if the arrow lands closer to the + sign you must drink the shots, if it lands closer to the – sign, you have the option to make someone else drink your shots. Yeah, it’s gonna get dirty near the end.

And the best variation is for last.

Strip drinking game. 
Each player has a + - panel. If the arrow stops at or closer to the +, the player must drink shots based on the number on the dice. If the arrow stops closer to the -, the player must remove articles of clothing based on the number on the dice. 

You can also play classic group games like Truth or Dare or Spin the Bottle.

Simple, fun, endlessly customizable and entertaining. You can make an almost endless variety of games. 

Build and assembly:
You can use ordinary PLA with this model and make it as colorful as you like. I print with 4 walls and 50% triangular infill with properly dried filament – tolerances are critical for smooth spinning.

Print the base and 8 Player Indicator Panels. You can glue these into place if you like. Print as many Box Decks, Heart Boxes, or + - shot glass panels as you want. Print the spinner arrow. Note the arrows in the picture are printed with exposed infill and no bottom layers for appearance.  

The design is modeled for this type of bearing:
https://www.amazon.com/XiKe-6000-2RS-10x26x8mm-Pre-Lubricated-Performance/dp/B07S8K6N6Z/ref=sr_1_4?crid=3TWCUX0GP9QN6&dib=eyJ2IjoiMSJ9.tUoU75-kTsnyYZlnIOquFIlMr5lOuGAwqyASpzLZxWeCLIweYaVw6AdYdqeNftx9RmcmZIwcB_NaFxiKIb8uBa2hpj9cDNnc7NkOlVTJvxiOHml93HtrnhGUSVaT9saYEkN0SBUfG0gja6KWh1g2w_UJQSmYk-TwlvofnbcHxpWR75DXDMLZgnWaiLpqgXn-4Y4auSvpLAO0RKafj5nOKN3dLwvnGSA8DlNQVZBnVjo.GFOmCeMoaLt8UJWAJLOKaRXhmZns8J1U1u9DSpERx-A&dib_tag=se&keywords=6000-2rs%2Bbearing%2B10x26x8%2Bsealed%2Bball%2Bbearings&qid=1737798941&sprefix=6000-2RS%2B%2Caps%2C175&sr=8-4&th=1

Place the bearing inside of the spinner. It should be a snug fit. If it’s a little loose (all bearings aren’t made with the same degree of precision, unfortunately) you can wrap a little Scotch tape around the bearing and trim it then push the bearing in. We’re not pulling G’s at the Nurburgring here so it won’t be making any high RPM’s. Push the spinner assembly firmly onto the upright shaft until it seats firmly. It should be firm enough for the shaft to rest snugly in the center of the bearing.

F3d files are included for remixing. 


The Valentine's Day Lover's Game + Drinking Game + Strip Game + More

Player Heart Box.stl

Looking to add a playful Valentine’s touch to your desk? The Valentine's Day Portrait Fidget Clicker is here! This design features Cupid and the Devil framed in an elegant picture frame. Compatible with two types of mechanical keyboard switches, it offers a perfectly satisfying click every time. Whether you’re seeking sensory stimulation or a fun way to stay focused, this clicker is sure to become your favorite decorative fidget. Easy to print and assemble, it’s the perfect addition to your fidget collection for Valentine’s Day!

No AMS? No problem! They're also designed to look like statues!

**Print Settings**
- No brims required
- No supports required
- 8-10% infill.
- 2-3 walls
- 0.4mm nozzle
- 0.12mm layer height for the character designs, 0.12 - 0.2mm layer height everywhere else
- Use 3MF file if you want to use your AMS for the colored character

**Items Used:**
- Kailh Jade Switch: https://amzn.to/3Y5lbE3
- Cherry Blue Switch: https://amzn.to/3NmYTJ1
- Gold PLA: https://amzn.to/4h7oH9p
- Peach PLA: https://www.matterhackers.com/store/l/pro-series-pla/sk/MZE7T0ST?aff=7646
- Blue PLA: https://us.store.bambulab.com/products/pla-matte?variant=40489682075784
- White PLA: https://www.matterhackers.com/store/l/175mm-pla-filament-white-1-kg/sk/MEEDKTKU?aff=7646
- Red PLA: https://amzn.to/4gKdomY

**Important Note: Not suitable for young children. Contains small parts that may pose a choking hazard.**

**Assembly Video:**
https://youtu.be/mca5DW2ytFY

Valentine's Day Fidget Clicker - Portraits of Retro Cupid and Devil in a frame

pixelandpapier__vday_fidget_frame_clicker__frame.stl

Crafted to hold your trinkets, from hair accessories and jewelry to an array of miscellaneous treasures, this Retro Pleated Heart Trinket Box is inspired by the enchanting and whimsical designs of the mid-20th century. Its quirky, retro, vintage allure will add a touch of nostalgia to your collection.

**Print Settings**
- No brim required
- No support needed
- 8-10% infill
- 2-3 walls
- 0.4mm nozzle
- 0.2mm layer height
- 3MF file included for AMS users

**PLA Information:**
- Polymaker PLA in Pastel Candy Pink: https://amzn.to/4bafycI
- Polymaker PLA in Pastel Banana: https://amzn.to/4cytj5t
- Polymaker PLA in Muted Red: https://amzn.to/4bmCfK2

**Assembly:**
Watch this video: https://youtu.be/QjOOD_pYfJU
 

valentine

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Better Together – Magnetic Keychain Pack

Jack'O'Valentine - Guity Gear - Fan art

Articulated Heart Dragon – Flexible Spherical Joint Dragon

The Valentine's Day Lover's Game + Drinking Game + Strip Game + More

Valentine's Day Fidget Clicker - Portraits of Retro Cupid and Devil in a frame

Retro Pleated Heart Trinket Box - Jewelry and Accesories Holder