Fidget Twisters

fidget-body.STL

Astrolabicon Pro // Ziggy

astrolabicon-ziggy.stl

the CHAIN // Twisting Marble Puzzle

thechain-v2.stl

KWOB Puzzle // Ziggy A

kwob-ziggy.stl

Screwball Puzzle

C.stl

Fidj Puzzle // Retro (2 versions)

fidj-retro.stl

Lil Astro Puzzle // Mini Astrolabicon

LilAstro.stl

Astrolabicon Pro

astrolabicon-pro.stl

the CHAIN puzzle // Retro

thechain-retro-v2.stl

Auxetic Cubes // 30mm 4x4

Auxetic Cubes 30mm 4x4.stl

Lockpick Puzzle 07

lockpick-07.stl

Strawception Cup

This cup _really_ sucks! Straw and cup become one with the Strawception Cup.

---

I wasn't going to share this file since it's nearly impossible to clean and generally a bad idea, but people keep requesting it and I'm not your mom... so you do you :P

Printed at 100% infill with high flow to make it watertight. I used [MatterHackers Natural Translucent PRO Series PLA](https://bit.ly/NaturalPLA) so I would at least not get pigments with my microplastics.

Lockpick Puzzle 09

lockpick-09.stl

Dastardly Dovetail Box (Round)

roundDD_Bottom.stl

Donut Factory Puzzle // 2x2 Twisty Marble Puzzle (24mm & 35mm inner cube)

What's better than a donut? SIX donuts!

---

There's a lot going on in the Donut Factory. Twisting, spinning, snapping... the feel is satisfying, but trying to solve this tricky puzzle might leave you frustrated!

---

**_Assembly_**

This puzzle is built around a tiny [24mm 2x2x2 puzzle cube](https://speedcubeshop.com/products/eastsheen-mini-2x2-keychain-cube?variant=40210339659889). You will have to remove the keychain part.

Print 8 copies of the included STL. No supports are required, but the overhangs may warp a bit on some printers, so you may want to include a wide brim and increase Z-retraction height for travel moves in your slicer settings.

After printing, use flush cutters to remove the brim and flat bottom.

Magnets are optional, but highly recommended since they improve the puzzle action and make assembly easier as well. You will need 48 3mm x 6mm neodymium magnets. I used E6000 adhesive to glue them into place. Each face has 2 magnets. Make sure the left holes all have the same polarity, and the right holes all have the opposite polarity. Also make sure the magnets are flush to the face. It can help to use the corner of a table or some tool to press the magnets into place. Allow the glue to dry before moving forward.

Next, glue 7 of the 8 sections onto the internal 2x2 cube. Use only enough adhesive to connect the print to the corner of a cube. If too much glue smushes out, your puzzle may not rotate!

Once the 7 parts are in place, load up the marbles. This puzzle was designed for use with these 14mm ABS no hole beads (true dimensions closer to 13.6mm). The easier way to add the marbles is to rotate individual halves 22.5 degrees so the tracks form an S-bend, so you can add all the marbles of one color (8 marbles per ring). Watching my assembly video might make this easier to understand!

After loading the 3 rings opposite of the missing piece, fill the top rings, including the final corner, and then glue that into place. 

The magnets will help hold the parts together while drying, but I like using [0.25" x 4" Grifiti Silicone Bands](https://amzn.to/45QcKz6) to compress the parts as well.

twisting

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Fidget Twisters

Astrolabicon Pro // Ziggy

the CHAIN // Twisting Marble Puzzle

KWOB Puzzle // Ziggy A

Screwball Puzzle

Fidj Puzzle // Retro (2 versions)

Lil Astro Puzzle // Mini Astrolabicon

Astrolabicon Pro

the CHAIN puzzle // Retro

Auxetic Cubes // 30mm 4x4

Lockpick Puzzle 07

Strawception Cup

Lockpick Puzzle 09

Dastardly Dovetail Box (Round)

Donut Factory Puzzle // 2x2 Twisty Marble Puzzle (24mm & 35mm inner cube)

Kwiblet Puzzle

Blobhead - Modular Articulating Art Toy

Auxetic Cubes // 30mm 6x6

Kwiblito Puzzle

5-Sided Twist Container